fearofpavement
Trying them all
Does anyone have any insight on the air filter issue I mentioned previously? Am I missing a part or else, how is the filter retained?
Does anyone have any insight on the air filter issue I mentioned previously? Am I missing a part or else, how is the filter retained?
Oh said:I was going to mention that but I did not want you to think I was being sarcastic. This is also hard on the engine as they are designed to run under a load. Your air filter does not sound right. Some older 55 models had a 2 piece filter. The base section screwed down onto the carb body and the top snaped closed over the base. On later models they were still 2 piece but an additoinal screw held the 2 halves together. I will try to put up a pic from the IPLs.............Ax.
Old style: See page D
http://www.husqvarna.com/ddoc/HUSI/HUSI1994_USen/HUSI1994_USen_I9400016_.pdf
Newer style: See page D
http://www.husqvarna.com/ddoc/HUSI/HUSI2000_AAaa/HUSI2000_AAaa_I0000076_.pdf
While these look similar, if you look closely the newer one has an extra screw to hold the filter on the base (part number 503 20 32-16).
fear, if you want to see it in person pull the cylinder off of your 026.
Enter your email address to join: