Search results

Good information Guys and thanks, I had bought an Echo CS310 with the cat muffler a few years ago and had a problem with the cat getting hot and making a bad layer of carbon build up in the port between the muffler and the piston which started to cause cylinder scoring. I took the engine apart...

Has anybody found out anything on if the 6401 muffler would fit the 6421?

Regarding lowes pro mix oil. Well i was at lowes today and looked at the bottle in question and as i suspected it has not been tested by JASO or ISO or anyone at all so who knows how good the quality is and what you are getting in the bottle. I would for sure not use it now. It would be like...

I have the same containers and i don't know why they do it. I took mine and remarked it and run around 47:1 for extra piece of mind. You should be o.k. with the extra 6oz with good oil in it.

Thank you eyolf for your reply, As for justsaws question, as for the saw manufactures, it would not matter because all would have to follow the same rules and laws, It was a small Echo saw i bought for limning that showed the different tags but was thinking on a 65 to 80cc saw and wanted to know...

bump, still waiting on an answere?.

I did a search but nothing came up, What is the difference between a California saw verses a 49 state saw verses a saw made for Canada?. I noticed this on the box from the last saw i bought.

There aways has to be a comic in the thread!.

Oil and more Oil. What it all comes down to is use a good oil from a reputable company, the saw manufactures do not make there own oils and is farmed out. any good oil will be certified by Jaso or Iso. Echo is made by "Citgo". Sthil Hp ultra is made by "Castrol Bp Lubricants". Husqvarna is...

Any oil that does not have a rating on it i would not consider. modern oils should have a FC or FD rating with FD being the newest. some manufactures don't pay to have there oils certified so you don't know what you are getting. i used that stuff around six months ago and it seemed not to work...

regarding oil and mixtures. Correct me if i am wrong on this, from what i have been reading on other sites and postings regarding 2 stroke oils is that today's oils are much better then oils formulated in the past, an engine is basically the same as one 10 to 25 years ago and if you run a good...

Regarding a carb kit. OK, so who would be good to order online a carb kit for a ZAMA part number RB54 rebuild kit that wont rip me off?, any suggestions?.

Husky 455 rancher. I have had a 455 rancher since early 2005 and it has ran flawless since it was new and i have cut up a few 55 inch trees as well with it, I run good fuel and oil in it and have no complaints at all, husky is on the fore front with these engines and all saws will have to be...

Picture of saw. I thought i would add a picture of the saw for a visual identification.

Regarding old homelite Thanks for the info so fare and i did e-mail that one link and waiting for a reply but what i need most for now is the specs and plug gap?.

Homelite CS3314. I guess nobody know much about this saw?.

I have had a homelite CS3314/10734R in almost new condition sitting for almost 15 years now in the cabinet and thinking of getting it running again, sure it needs a carb rebuild and fuel lines but i need the owners manual and any other info needed to get it running since all of our info is gone...

I do not have a lot of saws but my husky would come first, my little echo is second and is very reliable and has never let me down and then third would be my stihl, my little homelite is fifteenth out of all four of my saws because it always sits in the cabinet because you never know when it...

It is a newer version that replaced the 55, i will say that on the settings that it was way rich after starting it from what was sent on the post, it ran better at 1.25 on the low and 1.5 on the high, the low was close but the high was way rich and would not accelerate till it was leaned out to...

Hey, I really appreciate the info on this, the owners manual does not give a clue at all and this really helps, and again thanks.