Mastermind
Work Saw Specialist
Here's a really nice little saw that belongs to one of our fine members.
Can you guess what I'm gonna do to it??? :msp_wink:
Can you guess what I'm gonna do to it??? :msp_wink:
Mastermind meets the NE346XP
- Thread starter Mastermind
- Start date
Help Support Arborist Forum:
brokenbudget
Addicted to ArboristSite
paint it white and orange and call it a stihl?:jester:
komatsuvarna
Arboristsite MVP
Dont know, but im looking forward to it!
Mastermind
Work Saw Specialist
sunfish
Fish Head
Bout time Mastermind met one of these. :biggrinbounce2:
Im guessing your going to lightly sand the rust off the magnets and change the coil for starters.
audible fart
MS390 OAK CZAR
Yea. I can guess.
Just change the oil and install a new filter.....LOL
brokenbudget
Addicted to ArboristSite
Naw man. I'm gonna make a Stihl killer out of it.
shouldnt be hard:hmm3grin2orange:
Mastermind
Work Saw Specialist
Stock numbers:
Compression: 145psi
Squish: .038
Intake Duration: 148° = 74° from TDC
Exhaust Duration: 146° = 107° from TDC
Transfers 123° from TDC = 16° Blowdown
Piston crown above ring: 138.
After machine work:
Intake Duration: 156° = 78° from TDC
Exhaust Duration 142° = 109° from TDC
Transfers 125° from TDC = 16° Blowdown
Squish .018
.030 popup
I've got the rough in done on the ports and started the smoothing and polish. Not sure where the compression and port timing are at at the moment. Here's a few pics. I had to take these with my video camera as my batteries died in my Canon.
Compression: 145psi
Squish: .038
Intake Duration: 148° = 74° from TDC
Exhaust Duration: 146° = 107° from TDC
Transfers 123° from TDC = 16° Blowdown
Piston crown above ring: 138.
After machine work:
Intake Duration: 156° = 78° from TDC
Exhaust Duration 142° = 109° from TDC
Transfers 125° from TDC = 16° Blowdown
Squish .018
.030 popup
I've got the rough in done on the ports and started the smoothing and polish. Not sure where the compression and port timing are at at the moment. Here's a few pics. I had to take these with my video camera as my batteries died in my Canon.
Mastermind
Work Saw Specialist
SawTroll
Information Collector
Naw man. I'm gonna make a Stihl killer out of it.
It already is, so that one is real easy!
Mastermind
Work Saw Specialist
Lots of work to do here.
Don't tell anyone about this port shape. It's a secret. :msp_mellow:
Don't tell anyone about this port shape. It's a secret. :msp_mellow:
Chris J.
Addicted to ArboristSite
Audible fart, what the hell is your avatar :msp_confused:?
Mastermind
Work Saw Specialist
Self portrait. :biggrin::biggrin::biggrin:
Randy it needs a two piece head, then it'll be worth running. 
Randy it needs a two piece head, then it'll be worth running.
Shouldn't you be off shufflin'?
SawTroll
Information Collector
SkippyKtm
The Lorax, my FIL rip...
It makes me wanna barf...:eek2:
