That's cool! Pretty quiet with the silencer on.
Project pipe the echo
- Thread starter bikemike
- Start date
Help Support Arborist Forum:
That's cool! Pretty quiet with the silencer on.
bikemike
loud pipes save lives
bikemike
loud pipes save lives
Thank you should make a test cut and tune tomorrowWell done mike looks good and sounds great
GPX433Todd
Small Engine Addict
Need to see this in wood. My weekend can't start until I do.
bikemike
loud pipes save lives
IL be trying it soon. It will get some port work after the gtg
bikemike
loud pipes save lives
bikemike
loud pipes save lives
smokey7
jack of a lot ace of a few
I like it. How does it balance? Also we need one with no silencer.
bikemike
loud pipes save lives
With the silencer on its right side heavy without it it's ok. IL be wedging the pipe a bit more to bring it closer to the saw. IL get a vid hopefully soon of it running without a silencer
smokey7
jack of a lot ace of a few
Still nice job. I'm betting that pipe is helping that saw a good bit more then a box muffler. I really want one for my jonny 630 seeing you put them on a stock saw tells me a pit bike pipe would rock on a modded one.
bikemike
loud pipes save lives
I do have a pocket bike pipe on a poulan 46cc it works pretty good
Attachments
bikemike
loud pipes save lives
Sorry guys for not getting a non silencer vid up. Got busy building another bench for the fire pit. This is not the finished product. Gunna leave pipes long for tiki torches
smokey7
jack of a lot ace of a few
How hoed would it be to weld the pipes with a mig welder. I weld sheet metal all the time so I figured I would try.
bikemike
loud pipes save lives
I used a might with Flux core wire. If I would have had my friends gas bottle here I would have used smaller wire. Flux core is messy and gets lots of spatter that likes to find its way to my tungsten wedding ring
bikemike
loud pipes save lives
Do it up. If you work with sheet metal there is another way called hydro forming and it looks like fun. The guy on this vid reminds me of me lol
smokey7
jack of a lot ace of a few
Very good. I think I'd be a bit nervous doing that hydro forming. It be my luck to have sheet metal shrapnel in my face. I bet just about any pipe will help out a motor better then a box.
bikemike
loud pipes save lives
The thing about hydro vs air water or oil can't compress so when a leak does happen it's just a spray of fluids. If you pump 1 gallon of water I to a container that's all that it will hold. Air can compress and keep building until something let's loose and that's when **** hits the fan. So using a liquid youl be perfectly fine without a blast shield
smokey7
jack of a lot ace of a few
Right on I like it. I wonder how much psi from a pressure washer it would take? Also I'd then have to weld on a stinger and manifold. I'm betting it would have to pretty dam thin for it to work well.
