mijdirtyjeep
ArboristSite Operative
I have attached some images of my 5100s cylinder and I am wondering if you guys think it’s salvageable? Back story, tuning on the saw was a little lean and saw needed a new piston and ring. I put a Redbarn piston and ring in it as that’s all I could find available. Took the saw to the woodyard and it would just not run right. Might have put a half tank of fuel through it. It pissed me off so I put it on the shelf for a little over a year and just used the Dolmar 6100. I torn into it today and seen when I put the carb back on the cylinder (pic attached) I must have torn the boot. If the cylinder is toast does anyone know of a decent jug, piston and ring for this saw?