JT78
ArboristSite Guru
Anybody out there know what I can do to my saw to make it run stronger.
Tricks for an etech 359
- Thread starter JT78
- Start date
Help Support Arborist Forum:
Replace the catalytic muffler. Bailey's has them ($50± with shipping) try local Husky outlet. DON'T try to mod a cat muffler. Do search on muffler mods.
Hard Knocks
ArboristSite Operative
How much stronger do you want it to run? A fast and easy gain would be to order the non cat muffler for a 357XP 503 91 75-04.
Last edited:
JT78
ArboristSite Guru
Thanks guys! So Baileys sells a non cat muffler for my saw?
yes about 40 & 10 s&h
The cat muffler can be modded it's just a little harder provided you have the right tools!!!
The Cat contains things that won't do your lungs any good!!! You will NEED the Cat for warranty claim. It won't be warranted if muffler modded!!!
Last edited:
The 359 Cat muffler that I modded for an AS member contained nothing more that a perforated plate that needed to be drilled through.
Valid point on the Warranty issue..............I never really cared.............I wrench my own saws.............Chancey......maybe.......don't really care tho.
Platinum coating internal, changes carbon moxide to ? just like auto.
Did you wear a respirator? If not your choice; his too but he needs to make an INFORMED choice!!!
So can huffing freon... for a little while!!!
Lou.......
For what it is worth........I didn't know about the platinum.............had I known I would have taken the proper precautions!!!
For what it is worth........I didn't know about the platinum.............had I known I would have taken the proper precautions!!!
Griffbm3
ArboristSite Guru
Funny
Only once.................ain't different than sniffing the ol' ladiies undies...............I know you've done that.
Be honest with ol' Rich!!!
That's funny because I always thought Mobil 1 2T smelled just like my grandmothers panties. And I always thought I was strange for that comparison, it's nice to know that I am not alone...
Good luck with the 359, $40 ain't bad though, and Bailey's is a good company to deal with. You would be better off getting a few things though to make the shipping a little easier.
Good Luck,
Jason
Only once.................ain't different than sniffing the ol' ladiies undies...............I know you've done that.
Be honest with ol' Rich!!!
That's funny because I always thought Mobil 1 2T smelled just like my grandmothers panties. And I always thought I was strange for that comparison, it's nice to know that I am not alone...
Good luck with the 359, $40 ain't bad though, and Bailey's is a good company to deal with. You would be better off getting a few things though to make the shipping a little easier.
Good Luck,
Jason
Last edited:
outdoortype
ArboristSite Guru
Hard knocks had the right idea and part #. I would make sure that the saw is broken in (at least 10 tanks) and also use Stihl RS, RSC or Oregon LG, LP chain. If you change to a non cat muffler, you'll probably have to remove/grind the limiter caps on the carb to allow you to richen the carb slightly. But I did that and it's not that hard.
Griff just imagining knowing what Grams knickers smelled like may WELL put me in therapy.
JT78
ArboristSite Guru
I went ahead and ordered the proper muffler unfortunately I didnt need to order anything else yet. I am running a 20 bar with an oregon LG series chain.
Griffbm3
ArboristSite Guru
Enjoy the catalogue
Hey JT:
Order up a Bailey's catalogue like the rest of us, then you too can salivate when you flip the pages and imagine what you can do with that saw. What size bar are you running on that saw? Are you using safety chain? This place is really helpful, and addictive, so enjoy.
Jason
Hey JT:
Order up a Bailey's catalogue like the rest of us, then you too can salivate when you flip the pages and imagine what you can do with that saw. What size bar are you running on that saw? Are you using safety chain? This place is really helpful, and addictive, so enjoy.
Jason
