Tsumura light bars in Canada, getting some new sizes, any thoughts?

[thechainsawguy]

Have these arrived yet?

The bars have arrived....

Thanks.

Dave.

 

[thechainsawguy]

Good deal. When do you expect them?

The bars are all in, other than the Huskies being in 058 and Stihl in 063. I should be able to supply the bars in the size that people want.

Dave.

 

[thechainsawguy]

Picture of a large mount Stihl Tsumura light 36 bar.

Dave.

 

[Metals406]

Dave, pm me with what you're getting fir a 24" or 28" in stihl mount .063". Thanks!

 

[thechainsawguy]

I now have Tsumura Stihl light bars in 063 in 16, 20, 24, 28, 30, 32 and 36. Some in 36 large mount Stihl.

In Husky small mount Light Tsumuras in 16, 18, and 20. 058 .325 or 3/8ths. In reg Husky large mount light bars in 20, 24, 28, 30, 33, and 36, again 058, .325, 3/8th or 404.

Lots to choose from, pictures and weights I can post if asked, thanks.

Dave.

 

[SawTroll]

That's a good selection - but I suspect you need to state the dl counts as well, at least in .325.

I know that as the 20" "small Husky" Tsumura bar I got was marked for 81dl, while the Husky ones used to be 78dl, and now are 80dl - but not 81.

It added up perfectly with 72dl in 3/8" though, as you said it would, after changing the nose.

Changing the nose free of charge was of course good costumer service!

 

[thechainsawguy]

I just weighed the Tsumura light 16 in Husky small mount and it was .75 KG. I weighed an Oregon Pro-Lite and it was .91 KG.

Posting for those wanting to know.

Dave.

 

[mdavlee]

Picture of a large mount Stihl Tsumura light 36 bar.

Dave.View attachment 349315

That will look great on my 088

 

[weedkilla]

I just weighed the Tsumura light 16 in Husky small mount and it was .75 KG. I weighed an Oregon Pro-Lite and it was .91 KG.

Posting for those wanting to know.

Dave.

Wow!
Think I've got about 75' of 325 050 to use up..... Had one of my guys quit last week, i guess it will depend if his replacement has good wire and rock avoiding ability!

 

[mdavlee]

088 with new light and tough bar.

 

[savvman]

What size is that bar?

 

[mdavlee]

36" 119 dl of 3'8". I think it's the only size he got for the large mount stihls/dolmars.

 

[savvman]

Will a 3/8 chain be ok on an 084??

 

[mdavlee]

Will a 3/8 chain be ok on an 084??

I've been using it milling so far on a 48" bar without a ton of stretch. It really only had to be tightened after the first cut and it was good after that.

 

[savvman]

So i can get away from .404?
can i mill out a 3003 bar to fit a large mount?

 

[mdavlee]

I'll get some pictures tomorrow of the tail on the 3002 and 3003 bars.

 

[thechainsawguy]

I have some new design Tsumura light bars that are lighter and have a stiffer mount area. The new design is available in Stihl mount 24 and 28 in 063. and Husky 30 inch 058 gauge. I may look into picking up some Stihl mount Tsumura bars in 050 as I know it is popular with some users but they likely will be the first version old stock.

Dave.

 

[82F100SWB]

Not seeing any demand for it here, not sure if it's common elsewhere, but local to me husky large in 3/8 .058 18" is common.

 

[CR500]

I would be interested in a 20,24 and maybe another 28 in 3/8x.050

Stihl mount. If you get into them.

Sent from my non internal combustion device.

 

[thechainsawguy]

Not seeing any demand for it here, not sure if it's common elsewhere, but local to me husky large in 3/8 .058 18" is common.

I have Husky small mount in 18 058 and 20 in regular Husky mount. As well as other sizes. 16 to 36 inch.