Search results

Super Split? Yes

Powerhorse Horizontal Dual Split Log Splitter — 20-Ton, 208cc OPINIONS!!!! Is this splitter worth the $999?

There is a guy that I am going to be getting a load of wood from. His dump trailer is 14X7 with the metal mesh extension side on it which im thinking are about 4 feet high. hes going to be delivering pole length wood on it cut to 14' long. How many cords do you think will come on it?

Has anyone on here used both before? Are they basically the exact same thing? Becuase DR's is cheaper priced, im thinking probably because they can mass produce them so selling them at a cheaper cost the Super Split is possible. What you guys think....Thanks

Ok, Here is my problem I'm having and hoping all you guys can give my your two cents. I found a gentlemen that will see me firewood logs at a very reasonable cost. They will be delivered on a 26' long gooseneck trailer with 4' high side boards and 102" wide. No logs will be exceeding 12"...

Needs motor. 25 Years old not that it matters cause these things dont stop! Machines are generational, im second owner of it.

Hi, My elevator/ conveyor chain broke and im having the hardest time figuring out how to get these damn links aparts. It is #55 Detachable Chain i got the tool with it but what the heck...... Im twisting the links for so i can get the pieces aparts but do i pry or hammer or what....? Thanks

I will deffinetly send you some photos of before and after and will also make a new video. I'll get back in touch with ya. Thanks again for the comments.

Few Questions for the experts out there! 1) Can I use UHMW Plastic for the trough? 2) Right now the chains yes 2 of them one on each side of the flight bar. They ride in a little trough themselves. If i was to lay plastic UHMW across the entire trough would the chain for some reason go off...

Nylon UHMV Final Thought...... And right now the chain rides in a little troff itself but if i was to put nylon on i would just run it flat over the entire surface leaving no more troff but with the chain having sprockets at both ends it should still stay aligned right? Thanks Everyone!!

I agree about the pictures. I am thinking of also laying down like a thin plastic liner on the tray itself to help with the friction and rubbing, so basically the paddles will be plastic paddles with be hitting against the plastic tray. And i am HOPING that this heavy duty plastic will hold up...

Is there any reason why I cant fabricate my own flight bars out of heavy duty nylon plastic sheeting like 3/4" think piece? Because I got a used conveyor but the flights bars are all Fubar! and I also am going to shorten the whole unit down to 24' or 16' Im thinking 16' is plenty long...

I dont understadn why but Super Splitter let their patent expire. Tractor Supply came out with one for about 1300.00 and its alreadt recalled. Super split is the only one that can really make these well. Plus customer satisfaction thro Paul is awesome!

Two Questions for the PROS out there. 1) What would be an adequate length for my conveyor system i bought it came in 4 pieces that are each 8 feet long but with no chain, will 16' be long enough. Because cost is an issue and it uses the double chain with the paddle in the middle of the two...

Hey Guys I ended up calling the power company and they are going to raise the lines for me. So no electricity for me!!!! I am not getting killed over that, that is for sure. Thanks for all of the replies though.

I am having a logging truck deliver a traixle load of logs to my home. We have a low hanging powerline and I want to be certain that he can get under it. What is the height of a logging truck? Wherre he will be unloading there are no lines at all it is just the initial pulling into my driveway...

Thanks everyone very much. I hooked the 1hp motor up last night it seems to run pretty well. I have the motor shaft has a 2" pulley on it and the driven shaft has a 7" pulley on it, seems to work out pretty well.

Hey so after looking on the internet i found a RPM to pulley conversion chart and wow 3450 is way to fast, but my father just found in the midst of all his stuff! 1/2 hp 1725 rpm will this work?? And what should the rpm for the Driven Pulley be? 300rpm...?200rpm..? thanks everyone!

Hey guys someone gave me an electric motor to use on my elevator heres my dilema: 3hp 120v 20A motor 3450 RPM. Thats way to fast soooo.....what do i do to get my griven pulley down to 200 RPM is that to slow or that right speed for a firewood conveyor. Thanks Guys!!

Custom 4 way wedge for Sale Super Splitter Does anyone here want to buy a custom 4 way wedge for a Super Split? I made 2 of them just because they work well. Make me an offer and we will go from there. I have $20 in stock steel in it made out of 1/4" plate. I have put 2 cords through it just...