034 Super Cylinder vs 036

[Overkill338]

I've been told the 034 Super makes more power than the 036 Pro, due to the Super having better port timing and flow.

Is there anything to this?

 

[bulletpruf]

Subscribed.

 

[cgraham1]

That is what I’ve heard... 034 Super supposedly had the best port timing, much like the early 044, 046, 064, and 066s, vs. their later counterparts. There’s probably more difference on a stock saw than on a ported one.

 

[Overkill338]

That is what I’ve heard... 034 Super supposedly had the best port timing, much like the early 044, 046, 064, and 066s, vs. their later counterparts. There’s probably more difference on a stock saw than on a ported one.

I want to find one to try on my 360

 

[X 66 Stang347 X]

I've got a 036 with a ported 034s topend. It's runs good with a 20" and the Occasional 25.

 

[cuinrearview]

I've got a 036 with a ported 034s topend. It's runs good with a 20" and the Occasional 25.

That runs great! Who did the grinding?

 

[X 66 Stang347 X]

Well I wasn't going to mention who did the grinding he's not the most popular now. I had JMS do it and my 460/064. My 460 with a 064 piston

 

[cus_deluxe]

Well, he made some pretty good running saws, presumably still does, just all the extra baggage and bullchit that came along with doing biz with him was the hang-up. Ive run several of his saws that were good runners for sure.

 

[cus_deluxe]

Did he tell you that both were in the top 3 strongest ones hes ever ported??

 

[X 66 Stang347 X]

I did tear the saws down and check them before I ran them much. Yes the top 3 ever. The 460 had 250psi before bringing it down to 200

 

[cgraham1]

Did he tell you that both were in the top 3 strongest ones hes ever ported??

My 034Super/036 was the strongest one he ever built. Just sayin’.

 

[X 66 Stang347 X]

No Your wrong, He said it was mine! Lol

 

[Overkill338]

Lol any one of you want to sell a 034 Super top?

 

[Overkill338]

I just put a flywheel on mine and did a small timing advance. I took 0.025" off the key. I've got to tune it again, but here is video of it.

 

[cgraham1]

I sold mine. I figured I already had a MMWS ported 262xp, and an 036 is basically the same thing (except I prefer the Husky).

 

[X 66 Stang347 X]

Sounds good. That's probably around 8-10°. You'll know when it's to high, it'll start popping in the cut.

 

[scallywag]

034S vs 036 Cylinders.

Note the number of cooling fins also the different shape and size.



There are also open and closed port cylinders in the 034 range, though I'm not sure if the 034S had both....... There is also a belief that the early saws with the red master control switch had better cylinders / port timing, though this is unconfirmed.

 

[Overkill338]

034S vs 036 Cylinders.

Note the number of cooling fins also the different shape and size.

View attachment 664362 View attachment 664363 View attachment 664364

There are also open and closed port cylinders in the 034 range, though I'm not sure if the 034S had both....... There is also a belief that the early saws with the red master control switch had better cylinders / port timing, though this is unconfirmed.

Want to sell it? Lol

 

[Overkill338]

Sounds good. That's probably around 8-10°. You'll know when it's to high, it'll start popping in the cut.

You talking to me?

 

[scallywag]

Want to sell it?

Here's one that's cheap enough to experiment on!.....
https://www.ebay.com.au/itm/Stihl-0...8?hash=item28546706a0:g:yVYAAOSwNOJap90A&LH_P