Steven Trexler
ArboristSite Guru
First saw is a ms440 parts saw that I received in the last lot of saws I bought. Saw is in descent condition and has no major issues that I can see other then needing top end and other various parts. SOLD.
Second saw is a ms210 that honestly is not a beauty queen but it does run. However sometimes is bogs down while cutting so that will need to be addressed. The piston and cylinder look perfect and the carb was super clean when I pulled it apart to check it out. SOLD.
Last saw is a Husqvarna 455 rancher. Saw runs great and looks pretty good. Story with this saw is when I got it that it had no compression at all so I pulled it apart and the rings were carbon seized in the piston. So I put a new set of rings in and polished and removed all the carbon. Also opened up the muffler a little. Bar still has good life and the chain still has a lot life left it cuts really well. SOLD.
Also selling two echos. First is a 302 that sometimes will run but horribly leaning towards something wrong with points system. Saw is in descent shape. Second saw is 330evl that is in great shape. Saw runs, oils and cuts. May need a carb clean/rebuild as it is a little sluggish sometimes. Looking for $35 and half shipping cost on 302. SOLD.
Second saw is a ms210 that honestly is not a beauty queen but it does run. However sometimes is bogs down while cutting so that will need to be addressed. The piston and cylinder look perfect and the carb was super clean when I pulled it apart to check it out. SOLD.
Last saw is a Husqvarna 455 rancher. Saw runs great and looks pretty good. Story with this saw is when I got it that it had no compression at all so I pulled it apart and the rings were carbon seized in the piston. So I put a new set of rings in and polished and removed all the carbon. Also opened up the muffler a little. Bar still has good life and the chain still has a lot life left it cuts really well. SOLD.
Also selling two echos. First is a 302 that sometimes will run but horribly leaning towards something wrong with points system. Saw is in descent shape. Second saw is 330evl that is in great shape. Saw runs, oils and cuts. May need a carb clean/rebuild as it is a little sluggish sometimes. Looking for $35 and half shipping cost on 302. SOLD.
Attachments
-
2015-02-19_17-41-03_203.jpg73.5 KB · Views: 63
-
2015-02-19_17-40-57_519.jpg64.1 KB · Views: 61
-
2015-02-19_17-40-52_754.jpg65.1 KB · Views: 68
-
2015-02-19_17-40-46_605.jpg61.9 KB · Views: 71
-
2015-02-15_16-27-59_515.jpg73.3 KB · Views: 69
-
2015-02-15_16-27-52_91.jpg62.4 KB · Views: 68
-
2015-02-15_16-27-44_709.jpg71.3 KB · Views: 65
-
2015-02-22_16-13-58_123.jpg87.1 KB · Views: 57