ArboristSite.com Sponsors
www.harvesterbars.com


PM Canadien

cbfarmall

cbfarmall

Addicted to ArboristSite
Joined
May 11, 2003
Messages
3,661
Location
NW Indiana
There you go then. Going to be easier to find that one for sure and you get to use a good, direct drive pitch chain instead of friggin 1/2".
 
MacAttack

MacAttack

I love the smell of 2-stroke
Joined
Nov 15, 2019
Messages
919
Location
Western NY

Attachments

  • 20200611_201927.jpg
    20200611_201927.jpg
    6 MB · Views: 10

89HD

OLD SAW
Joined
Mar 11, 2019
Messages
254
Location
Kamloops
What made the drum removal difficult?

I just received this in the mail in case I decide to try and replace my worn drum/sprocket on my 270. Big thanks to @heimannm.
Getting the clutch out of the drum was the difficult part, just stuck in there for years.
That was a good score. Lots of knowledgable people on here willing to help others. The PM parts are scarce.
 
MacAttack

MacAttack

I love the smell of 2-stroke
Joined
Nov 15, 2019
Messages
919
Location
Western NY
Getting the clutch out of the drum was the difficult part, just stuck in there for years.
That was a good score. Lots of knowledgable people on here willing to help others. The PM parts are scarce.
Was the clutch stuck to the key on the crank?
It makes me nervous tearing into that old clutch...
 
Fackir

Fackir

ArboristSite Lurker
Joined
Nov 7, 2018
Messages
41
Location
Almalagues
Good morning. Need some help with the model of this one... Don't say Canadien or PM anywhere.. Just Made in Canada.. Sorry about my English. Cheers
 

Attachments

  • IMG_20200614_113223.jpg
    IMG_20200614_113223.jpg
    5.6 MB · Views: 12
  • IMG_20200614_113235.jpg
    IMG_20200614_113235.jpg
    5.7 MB · Views: 12
  • IMG_20200614_113203.jpg
    IMG_20200614_113203.jpg
    6.3 MB · Views: 13
  • IMG_20200614_113235.jpg
    IMG_20200614_113235.jpg
    5.7 MB · Views: 14
  • IMG_20200614_113245.jpg
    IMG_20200614_113245.jpg
    6.5 MB · Views: 15
  • IMG_20200614_113306.jpg
    IMG_20200614_113306.jpg
    5 MB · Views: 14
  • IMG_20200614_113223.jpg
    IMG_20200614_113223.jpg
    5.6 MB · Views: 14
canadian175

canadian175

ArboristSite Operative
Joined
Nov 9, 2018
Messages
127
Location
irishtown -summerside
95 cc.i had 1 with 16 inch bar.some a.hole stole it on me was my first saw i was 15 yrs old.bough it of an older retired gentileman who was retired.it only sawed 6 chords of wood when i got it.only paid $20.00 for it.
 

89HD

OLD SAW
Joined
Mar 11, 2019
Messages
254
Location
Kamloops
Good morning. Need some help with the model of this one... Don't say Canadien or PM anywhere.. Just Made in Canada.. Sorry about my English. Cheers
I think that would be the PM Canadien 177, 187 sold as Skil 1661. From what I've seen the Skil saws are not stamped with Canadien but still have the maple leaf.
 

89HD

OLD SAW
Joined
Mar 11, 2019
Messages
254
Location
Kamloops
Picked up a PM Canadien 380 today it has spark, needs a complete recoil and muffler. If someone has anything available they would sell it would be appreciated. It's a large recoil, cover is about 4 inches across. Muffler and recoil are the same as Canadien 270.
IMG_2769.JPG IMG_2770.JPG IMG_2771.JPG IMG_2772.JPG
 
cbfarmall

cbfarmall

Addicted to ArboristSite
Joined
May 11, 2003
Messages
3,661
Location
NW Indiana
Sadly, the muffler and recoil are not the same as a 270, not at all. Recoil is larger and the muffler is a completely different design. Wouldn't even come close to bolting up. The recoil can probably be had easier, but the muffler is going to drive you up a wall trying to locate a spare. It will be the same as any 275, 276, 385, 1680, etc.

Last exhaust I found came from Australia.
 
Top