I got a bunch of wood stuck in the tip of my bar. It's a 372xp with a 24 bar.
The roller is stuck now and won't budge. What's the best way to get it out or is the bar trashed?
With the chain on push the bottom of the bar into a stump or something to get the chain moving usually releases junk stuck in the bar.Hope this helps.
to remove crud from bar groove when chain is off, i found that a coke tabe fits almost perfect....just a tip
I got a bunch of wood stuck in the tip of my bar. It's a 372xp with a 24 bar.
The roller is stuck now and won't budge. What's the best way to get it out or is the bar trashed?[/QUOTE
Does anyone have this happen a lot with tulip poplar? I cut a recently dead Tulip Poplar up 16" and it jammed my Husky 51 twice. The tree had recently blown over and the bark seemed clean.
Greasing the tip is what always got mine sticking I don't grease
anymore so no sticky.
Hmmmm, I've heard the "grease" word before, but not really sure where it applies to a chainsaw.:monkey:
coke tab? Ever heard of a bar groove cleaner/depth gauge tool? go to Bailey's site........They're about $4. We use them daily. .....
.
With the chain on push the bottom of the bar into a stump or something to get the chain moving usually releases junk stuck in the bar.Hope this helps.
I got a bunch of wood stuck in the tip of my bar. It's a 372xp with a 24 bar.
The roller is stuck now and won't budge. What's the best way to get it out or is the bar trashed?
Enter your email address to join: