Husky 372xp or Stihl ms441

Rugged made
Shop deals on ebay
Wesspur
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
stevethekiwi said:
just sayin what Thall doesnt have the balls to say :D:D:D
Click to expand...

Grrrrrrrrrrrrrrr I was being decent toward Funky. He was saying 50% failure rate on Huskies in his store. I didn't and still don't buy that but I wasn't gonna be mean to him, shoot I don't know the man. I can't call the man the idiot, I'm a man of high moral fiber,LOLOL
 
THALL10326 said:
Grrrrrrrrrrrrrrr I was being decent toward Funky. He was saying 50% failure rate on Huskies in his store. I didn't and still don't buy that but I wasn't gonna be mean to him, shoot I don't know the man. I can't call the man the idiot, I'm a man of high moral fiber,LOLOL
Click to expand...

Well i didnt actually call him an idiot directly... maybe i did?


Hi moral fiber... :dizzy:
 
Tzed250 said:
I'll tell you what...you think about it...I have work to do ;)
Click to expand...

I am sure you do work but not with your saws like I do. If you
did your arguments may mean a little more but you don't so
If you are going to have any idea fill that saw ten times from
daylight to dark for years on end and see how well it holds up!
I have had good stihls before the flippy caps and bs switche's
however, I don't have time to finger f:censored: caps and clean
filters. I have too much work to get done for that and when extreme
performance is required husky fill the bill.
 
ropensaddle said:
I am sure you do work but not with your saws like I do. If you
did your arguments may mean a little more but you don't so
If you are going to have any idea fill that saw ten times from
daylight to dark for years on end and see how well it holds up!
I have had good stihls before the flippy caps and bs switche's
however, I don't have time to finger f:censored: caps and clean
filters. I have too much work to get done for that and when extreme
performance is required husky fill the bill.
Click to expand...

lol... a day milling on my 395's is 20 tanks................. thats some hard work done right there. still goin strong. 066's were 25 tanks for the same result, and the clutches didnt like the heat. could cook eggs on the side covers
 
poopinsaddle said:
I am sure you do work but not with your saws like I do. If you
did your arguments may mean a little more but you don't so
If you are going to have any idea fill that saw ten times from
daylight to dark for years on end and see how well it holds up!
I have had good stihls before the flippy caps and bs switche's
however, I don't have time to finger f:censored: caps and clean
filters. I have too much work to get done for that and when extreme
performance is required husky fill the bill.
Click to expand...

I am sure if you keep telling everybody on this site how hard you work one day someone will believe it.


Go cry me a river about your hard work. I have earned my living with a saw before, just like you. Your experience is not special. Get used to it. You are not the only one with a saw. Other pros get the job done with a Stihl just fine. You act as if it cannot be done. That makes you full of $hit!!! Extreme performance my a$$. You don't work a saw any harder than anybody else. Are you still mad??? What is your problem? Did somebody urinate in your Cheerios?

You must have some serious issues that you need to work out with yourself. All this hostility pent up inside of you cannot be good for you. Give it a rest.

I have said before, They are all great saws. If you will not agree with this that makes you either blind or stupid, which one is it?

Boy, I hope you have a better day tomorrow. :cheers:
 
Tzed250 said:
I am sure if you keep telling everybody on this site how hard you work one day someone will believe it.


Go cry me a river about your hard work. I have earned my living with a saw before, just like you. Your experience is not special. Get used to it. You are not the only one with a saw. Other pros get the job done with a Stihl just fine. You act as if it cannot be done. That makes you full of $hit!!! Extreme performance my a$$. You don't work a saw any harder than anybody else. Are you still mad??? What is your problem? Did somebody urinate in your Cheerios?

You must have some serious issues that you need to work out with yourself. All this hostility pent up inside of you cannot be good for you. Give it a rest.

I have said before, They are all great saws. If you will not agree with this that makes you either blind or stupid, which one is it?

Boy, I hope you have a better day tomorrow. :cheers:
Click to expand...

TZ,

Yeah and I walked __________ miles to school in barefeet with ___________ feet of snow up to my :censored: and the ole bull in the pasture didn't take kindly to me and therefore, I :censored: because of the :censored: and I hope you understand.

[start blah, blah, blah snip]
.......................................................
.......................................................
.......................................................
.......................................................
.......................................................
.......................................................
[end blah, blah, blah snip]

Joat
 
Tzed250 said:
I am sure if you keep telling everybody on this site how hard you work one day someone will believe it.


Go cry me a river about your hard work. I have earned my living with a saw before, just like you. Your experience is not special. Get used to it. You are not the only one with a saw. Other pros get the job done with a Stihl just fine. You act as if it cannot be done. That makes you full of $hit!!! Extreme performance my a$$. You don't work a saw any harder than anybody else. Are you still mad??? What is your problem? Did somebody urinate in your Cheerios?

You must have some serious issues that you need to work out with yourself. All this hostility pent up inside of you cannot be good for you. Give it a rest.

I have said before, They are all great saws. If you will not agree with this that makes you either blind or stupid, which one is it?

Boy, I hope you have a better day tomorrow. :cheers:
Click to expand...

Anyone with half a brain could tell you are the hostile party here.
I have to tell you that your wrong, I do work harder than most.
I have been told so many times and can also see it everywhere
I go, men gettin there at 9 and leaving at 3, I get there at 7 and
leave at dark. I have seen your spotless saws and they spell setting
in the truck listening to the radio while, the boss does the work.
I have seen this scenario as well, so your only foolin yourself.
Get a life and get up with the chickens learn a trade and go to work
pard!
 
Last edited:
ropensaddle said:
Anyone with half a brain could tell you are the hostile party here.
I have to tell you that your wrong, I do work harder than most.
I have been told so many times and can also see it everywhere
I go, men gettin there at 9 and leaving at 3, I get there at 7 and
leave at dark. I have seen your spotless saws and they spell setting
in the truck listening to the radio while, the boss does the work.
I have seen this scenario as well, so your only foolin yourself.
Get a life and get up with the chickens learn a trade and go to work
pard!
Click to expand...

Rope, oh Rope,

If only your saws could speak. I'd like to get them signed up here on AS, or see if the fine mods would allow a special "guest" post, so we could get the real story.

Now, I'm gonna match your half brain, and throw another half brain in the pot and see if you can match it.

You other fellas (and ladies, if applicable) in?

Joat
 
poopinsaddle said:
Anyone with half a brain could tell you are the hostile party here.
I have to tell you that your wrong, I do work harder than most.
I have been told so many times and can also see it everywhere
I go, men gettin there at 9 and leaving at 3, I get there at 7 and
leave at dark. I have seen your spotless saws and they spell setting
in the truck listening to the radio while, the boss does the work.
I have seen this scenario as well, so your only foolin yourself.
Get a life and get up with the chickens learn a trade and go to work
pard!
Click to expand...


More working class hero crap.

Hey Poop, I get up at 4:20 AM every morning but Sunday and my machine is making chips by 6:10 AM. My career is year 'round and demand is at an all time high and will only get better.

If you work so hard and it is so hard on you, then maybe you chose the wrong career path. Maybe you should investigate another line of work so you don't have to squirt so many tears at the end of the day.

All this hypertension is gonna do you in Poop. Take it easy, relax.

You are the one that is fooled. Get over yourself so we can all get on with it.

Happy sawing:)
 
joatmon said:
Rope, oh Rope,

If only your saws could speak. I'd like to get them signed up here on AS, or see if the fine mods would allow a special "guest" post, so we could get the real story.

Now, I'm gonna match your half brain, and throw another half brain in the pot and see if you can match it.

You other fellas (and ladies, if applicable) in?

Joat
Click to expand...

If they could speak joat buddy they would say I want a new home I am being abused:laugh:
 
ropensaddle said:
If they could speak joat buddy they would say I want a new home I am being abused:laugh:
Click to expand...

Rope,

Bet they'd say, shapen the :censored: chain and we wouldn't have to work as hard or as long and you could get back to making an :censored: out of yourself on AS and we could get some rest.

Of course, I could be fulla :censored:,

Joat
 
Tzed250 said:
More working class hero crap.

Hey Poop, I get up at 4:20 AM every morning but Sunday and my machine is making chips by 6:10 AM. My career is year 'round and demand is at an all time high and will only get better.

If you work so hard and it is so hard on you, then maybe you chose the wrong career path. Maybe you should investigate another line of work so you don't have to squirt so many tears at the end of the day.

All this hypertension is gonna do you in Poop. Take it easy, relax.

You are the one that is fooled. Get over yourself so we can all get on with it.

Happy sawing:)
Click to expand...

You feel lucky or something? I will say most days I love my work
like most that enjoy tree work. Setting there running that cnc mill
is getting to your brain. I have not shed a tear since my grand ma
died in 78 so ya got me mistaken. Your name calling is starting to
make me think less and less of your ability to discuss issues.
 
joatmon said:
Rope,

Bet they'd say, shapen the :censored: chain and we wouldn't have to work as hard or as long and you could get back to making an :censored: out of yourself on AS and we could get some rest.

Of course, I could be fulla :censored:,

Joat
Click to expand...

Joat I keep five chains sharp and ready to change at the moment they start to get dull. I was just swamped by the storms and have put everything but trees on houses off until I can catch up. I am glad for being behind so no tears just :cheers:
 
ropensaddle said:
You feel lucky or something? I will say most days I love my work
like most that enjoy tree work. Setting there running that cnc mill
is getting to your brain. I have not shed a tear since my grand ma
died in 78 so ya got me mistaken. Your name calling is starting to
make me think less and less of your ability to discuss issues.
Click to expand...

Clint,

That you?

Joat
 

Similar threads

W
372xp
Replies
3
Views
638
Ronaldo
Ronaldo
Shawn39
462 or 572?
Replies
14
Views
800
altatim
altatim
T
Recommendation?
Replies
6
Views
549
pdqdl
pdqdl
P
In the market for a bigger saw
2 3
Replies
40
Views
2K
Pjohnson
P
U
Stihl 066 Crank size question
Replies
17
Views
1K
HansFranz
HansFranz

Latest posts

Back
Top