Indiana gtg

Shop deals on ebay
Advertise with us
Wesspur
Rugged made
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
fat bottom girl...

Anyone that thinks the 441 can't run with a big bar can kiss my :censored:! Same bar (28"), same chain (square ground) and the 441 runs within 4-5 seconds of the ms660 on 28" beech hardwood. Pretty good considering it gives up 1.5HP to its big brother.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/9PHnsoClJys&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/9PHnsoClJys&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>


<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/t-tZz2wo9lE&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/t-tZz2wo9lE&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
 
One fast dolmar...

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/jjriW-powdg&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/jjriW-powdg&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
 
One of Erick's big saws...

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/80V1hqdlLNA&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/80V1hqdlLNA&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
 
Saw pics...

Erick and Wild Knight
picture.php


Brad the Snellerizer
picture.php


Pine Martin, Stihlhead and Whitedogone
picture.php
 
The LOOOOOOOONG bar!

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/svxczSd8fSc&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/svxczSd8fSc&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
 
Brad's screamin 084

The fastest saw at the GTG in big wood by 10 seconds...
(Yeah, yeah I took my chaps off, I know better, nuff said.)


<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/Zx6-GFePKBA&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/Zx6-GFePKBA&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
 
Last edited:
WOW You guys took some great pics and video.:cheers:

I didn't know my 7900 was running that good.:clap: I'm starting to like the 660 more and more lately. And I completely agree with Wk the 441 has impressed me for some time now. It has plenty of power for the weight, and I honestly think it has just as much power as a stock 7900.

Nik/FATGUY is a great guy and a good friend. Despite taking a shortcut to get to the gtg:dizzy: we had a great time on the road, lots of good conversations.

Thanks again Eric for hosting a great GTG.
 
Last edited:
blsnelling said:
Here's the link to the video. It'll be a while before they're done with their processing. I just want to get the link posted before going to bed.

The fuel testing is the last several minutes. I've been saying for some time that AvGas made a saw slower than pump gas. We had an asortment of fuels on hand and I volunteered my 064 with a ported OEM 066 topend as a test bed. This saw makes 150 PSI compression. We tested Sunoco 94, VP C10, AvGas, and 95 octane pump gas with no ethanol. It turns out that all fuels cut within 3 seconds of each other in 30" Beech and cut time's a little more than 35 seconds. That could be nothing more than operator difference. A saw with significantly more comression may give different results, but in this saw it just didn't make much difference.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/rvMSbSBZQbw&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/rvMSbSBZQbw&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
Click to expand...

HEY LOOK! My muffler mod is on YouTube! I'm famous! Hahaha LOL

Brad, you got a close up still pic of the 064/066 muffler?.. I'm curious to see the heat patina the copper got. You can definitely see the color difference between the black paint and the copper in the video though. I thought it sounded pretty good too! :cheers:
 
Wild Knight said:
One of Erick's big saws...

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/80V1hqdlLNA&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/80V1hqdlLNA&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
Click to expand...

That ones an 056 Mag II

That old thing is still getting it done pretty well, pulls like a tractor... she ain't fast but she will put the trees in the stove. ;)

Nice vids and pics WK
 
really now. were there huskies there?

i saw a couple in the pics.... 2 372s a 346 a 242? a 395? but not more than five or six.... what is up with that?
 
Yeah, plenty of husky's; even a Jonsered on the mill. See post #550 though :hmm3grin2orange: I've got a lot of video of Brad tunin and cuttin small cookies. I'll try to get some of them up.
 
Last edited:

Similar threads

Bob95065
Santa Cruz, CA Arboristsite GTG
2
Replies
34
Views
3K
davidwyby
davidwyby
M
How “rebuildable” are mid-level or modest pro-level chainsaws?
3 4 5
Replies
83
Views
11K
hwp
hwp
C
Husqvarna 372 Not starting - suspected fuel problem
Replies
17
Views
4K
Castn'Blast
C
Amin_1992
Selling my old MS250 and thinking of getting an MS261. Can I get some advice?
2 3 4
Replies
75
Views
12K
Hirdatron
H
S
sawbucks, i need to see pics.
Replies
5
Views
2K
CaseyForrest
CaseyForrest

Latest posts

Back
Top