My BIL, a good guy

[rwood8600]

Bit late on this thread

I have not read all the posts, but would like to contribute. Would like to contribute in any way, paypal etc...Not as some charity case, but just recognition of an unfortunate accident to some one who is quite selfless and generous with there time. I also applaud the responses from AS. I have MUCH RESPECT for Steve's BIL, and I feel it is worth helping out those people that give help unrewardingly to others - they just do it out of decency and kindness.

So what the current state of play and where do I send my contribution?

 

[Work Saw Collector]

I have not read all the posts, but would like to contribute. Would like to contribute in any way, paypal etc...Not as some charity case, but just recognition of an unfortunate accident to some one who is quite selfless and generous with there time. I also applaud the responses from AS. I have MUCH RESPECT for Steve's BIL, and I feel it is worth helping out those people that give help unrewardingly to others - they just do it out of decency and kindness.

So what the current state of play and where do I send my contribution?

PM sent Thanks

 

[Brian VT]

Not as some charity case, but just recognition of an unfortunate accident to some one who is quite selfless and generous with there time.

+2. We hope BIL realizes this, as you did. It's a tip of the hat and raising of a glass to him for being one of the good guys. We all here, I think, want to do what we can to dispel the old "Nice guys finish last." and "No good deed goes unpunished." attitude that drags some good people down. That's my reason for getting involved with this. I don't give to charities.

 

[ropensaddle]

Clint's still dead over here from when I shot him last week too. LOL

Must not have been fatal cause I shot you also :monkey:Also gave two novas to deserving participants.

 

[Brian VT]

Must not have been fatal...

You can't kill Clint. Everyone knows that.

 

[FATGUY]

Clint's still dead over here from when I shot him last week too. LOL

My advice is if he asks you to appologize to his mule, you do it. If not for your sake, the poor old casket makers sake. "Rojo's on one side. Baxters on the other" and ole' rope right in the middle.:hmm3grin2orange:

 

[Brian VT]

LOL Fatguy !
Thanks. Now I want to put the tape in the VHS and stay up drinking beer and smoking cigars way past my bedtime on a worknight.

 

[FATGUY]

LOL Fatguy !
Thanks. Now I want to put the tape in the VHS and stay up drinking beer and smoking cigars way past my bedtime on a worknight.

my favorite quotes from the other 2 are: "This train'll stop at Tucumcari" and "When you have to shoot, shoot. Don't talk"

 

[blsnelling]

What are you guys talking about? This saw will be running tomorrow night with any luck!:hmm3grin2orange: I can't leave a project laying around. The piston came today, but I've yet to open it. The chaps are ordered as well.

Pat lives in Dallas if we have a reputable member in that area that would like to make the delivery. I'll be shipping the saw and chaps. TRI955 will be shipping a case for the saw. I have SteveHs address and phone number should everything come together quickly as it looks like it will. Too bad you probably won't be the one to hand this stuff to him. That would be fun!

Contributions are now up to $445!:hmm3grin2orange:

 

[Saw Dr.]

Must not have been fatal cause I shot you also :monkey:Also gave two novas to deserving participants.

I tried shooting at you, but the AS "you have to spread REP around" forcefield bounced my bullet away.

 

[FATGUY]

What are you guys talking about? This saw will be running tomorrow night with any luck!:hmm3grin2orange: I can't leave a project laying around. The piston came today, but I've yet to open it. The chaps are ordered as well.

Pat lives in Dallas if we have a reputable member in that area that would like to make the delivery. I'll be shipping the saw and chaps. TRI955 will be shipping a case for the saw. I have SteveHs address and phone number should everything come together quickly as it looks like it will. Too bad you probably won't be the one to hand this stuff to him. That would be fun!

Contributions are now up to $445!:hmm3grin2orange:

We were just messing around with Rope's name and avitatr. Sergio Leone's 3 Clint Eastwood "Sphagetti Westerns". Lost track, sorry....
:biggrinbounce2:

 

[Work Saw Collector]

What are you guys talking about? This saw will be running tomorrow night with any luck!:hmm3grin2orange: I can't leave a project laying around. The piston came today, but I've yet to open it. The chaps are ordered as well.

Pat lives in Dallas if we have a reputable member in that area that would like to make the delivery. I'll be shipping the saw and chaps. TRI955 will be shipping a case for the saw. I have SteveHs address and phone number should everything come together quickly as it looks like it will. Too bad you probably won't be the one to hand this stuff to him. That would be fun!

Contributions are now up to $445!:hmm3grin2orange:

445 thats cool.

 

[blsnelling]

Who's name is Ken? I have a PayPal contribution that I don't know which AS member gave.

 

[ropensaddle]

We were just messing around with Rope's name and avitatr. Sergio Leone's 3 Clint Eastwood "Sphagetti Westerns". Lost track, sorry....
:biggrinbounce2:

Well are you gonna pull them pistol's boy or whistle Dixie

 

[Brian VT]

my favorite quotes from the other 2 are: "This train'll stop at Tucumcari" and "When you have to shoot, shoot. Don't talk"

"...he wasn't armed !"
"Well...he should have armed himself."

 

[ropensaddle]

"...he wasn't armed !"
"Well...he should have armed himself."

Dyin ain't much of a livin boy:hmm3grin2orange:

 

[Brian VT]

What are you guys talking about?

Aren't you paying attention to this thread, Brad ?
LOL. Sorry. G'night, and thanks again for all your effort.
Blondeeeeeee !!!!!!!!! LOL

 

[blsnelling]

I measured the piston and rings and am concerned about the fit. The piston is .007" smaller than the bore and the ring end gap is .022" and .020". I'm not sure what to do at this point.

 

[Saw Dr.]

I'll make it simple http://www.baileysonline.com/itemdetail.asp?item=MPA+PC1668B&catID=378
Or an OEM top end from Bcorradi. It's not like there is no $ in the coffers....

 

[ropensaddle]

I measured the piston and rings and am concerned about the fit. The piston is .007" smaller than the bore and the ring end gap is .022" and .020". I'm not sure what to do at this point.

New piston, why not.