Stihl MS660 vs Husqvarna 390xp (vid)

[STEVEGODSEYJR]

Ya jaw seems to be working just fine.

:agree2::yourock:

 

[BarkBuster20]

Okay i will carefully explain everything, anyone who doesnt have the ability to understand this may as well just commit suicide, cause your a lost cause.
For one i never once said the husky was better or the stihl was better, that has nothing to do with what im saying. second off, which is my main point. that size wood, being doug fir (anyone who hasnt cut doug fir may as well keep there mouths shut) coupled with the size of the bar and chain on those 90cc saws, will not give you an accurate depiction of how powerfull either saws are, but of course all you modders support it, because a "modded" saw wont appear to have better preformance if its cutting the size wood its intended for. you juice a saw up and sink it in little softwood to try and make some money, your all pathetic. put a real bar and chain on that saw and sink it into real wood AND BACK UP YOUR WORK. your basicly false advertising. your making people believe the saw is getting more of an increase than it really is. anyway i expect a lot more stupid comments to follow this so bring it on. i know you modders are just trying to get more businus, how much you guys charge to MM and port a saw? bunch of ####in rip offs. spend the extra money and get a bigger saw itll do better. AND BIG SAWS ARE FOR BIG WOOD. morons.

 

[blsnelling]

Care to explaing the 15%-30% gains we see in the same piece of wood? I didn't think so!

 

[BarkBuster20]

The burden of proof is on your shoulders. I can tell you right now, your 044 won't hold a candle to either one of these saws. Put up or shut up!

lets see you put up some ####, i dont see slingr putting up any new vids of him testing the saws in real wood with real bars, why shouldnt he have to "prove" anything. brad you must have never cut doug fir. and i like how you just assume stuff.that fir demonstration was pathetic. and yes my 044 would hold more than a candle to those two saws IN THAT WOOD.

 

[STEVEGODSEYJR]

Okay i will carefully explain everything, anyone who doesnt have the ability to understand this may as well just commit suicide, cause your a lost cause.
For one i never once said the husky was better or the stihl was better, that has nothing to do with what im saying. second off, which is my main point. that size wood, being doug fir (anyone who hasnt cut doug fir may as well keep there mouths shut) coupled with the size of the bar and chain on those 90cc saws, will not give you an accurate depiction of how powerfull either saws are, but of course all you modders support it, because a "modded" saw wont appear to have better preformance if its cutting the size wood its intended for. you juice a saw up and sink it in little softwood to try and make some money, your all pathetic. put a real bar and chain on that saw and sink it into real wood AND BACK UP YOUR WORK. your basicly false advertising. your making people believe the saw is getting more of an increase than it really is. anyway i expect a lot more stupid comments to follow this so bring it on. i know you modders are just trying to get more businus, how much you guys charge to MM and port a saw? bunch of ####in rip offs. spend the extra money and get a bigger saw itll do better. AND BIG SAWS ARE FOR BIG WOOD. morons.

Spell Check is your friend. Steve

 

[Saw Dr.]

Okay i will carefully explain everything, anyone who doesnt have the ability to understand this may as well just commit suicide, cause your a lost cause.
For one i never once said the husky was better or the stihl was better, that has nothing to do with what im saying. second off, which is my main point. that size wood, being doug fir (anyone who hasnt cut doug fir may as well keep there mouths shut) coupled with the size of the bar and chain on those 90cc saws, will not give you an accurate depiction of how powerfull either saws are, but of course all you modders support it, because a "modded" saw wont appear to have better preformance if its cutting the size wood its intended for. you juice a saw up and sink it in little softwood to try and make some money, your all pathetic. put a real bar and chain on that saw and sink it into real wood AND BACK UP YOUR WORK. your basicly false advertising. your making people believe the saw is getting more of an increase than it really is. anyway i expect a lot more stupid comments to follow this so bring it on. i know you modders are just trying to get more businus, how much you guys charge to MM and port a saw? bunch of ####in rip offs. spend the extra money and get a bigger saw itll do better. AND BIG SAWS ARE FOR BIG WOOD. morons.

I notice that the biggest saw in your sig is the mighty 044 you speak of. You'll need some big boy toys if you want to hang with the boys in the big sandbox. Yes, all of AS are morons, and you're the sane one....

 

[Erick]

Okay i will carefully explain everything, anyone who doesnt have the ability to understand this may as well just commit suicide, cause your a lost cause.
For one i never once said the husky was better or the stihl was better, that has nothing to do with what im saying. second off, which is my main point. that size wood, being doug fir (anyone who hasnt cut doug fir may as well keep there mouths shut) coupled with the size of the bar and chain on those 90cc saws, will not give you an accurate depiction of how powerfull either saws are, but of course all you modders support it, because a "modded" saw wont appear to have better preformance if its cutting the size wood its intended for. you juice a saw up and sink it in little softwood to try and make some money, your all pathetic. put a real bar and chain on that saw and sink it into real wood AND BACK UP YOUR WORK. your basicly false advertising. your making people believe the saw is getting more of an increase than it really is. anyway i expect a lot more stupid comments to follow this so bring it on. i know you modders are just trying to get more businus, how much you guys charge to MM and port a saw? bunch of ####in rip offs. spend the extra money and get a bigger saw itll do better. AND BIG SAWS ARE FOR BIG WOOD. morons.

Yeah, I remember when I used to know it all.

Lets just for the sake of you own edification hear exactly why you think your stock 044 would out cut either of those saws in ANY wood???? opcorn:


BTW just so BB knows whats up anyone here who has ever paid me a dime to mod a saw raise your hand.

 

[BarkBuster20]

Care to explaing the 15%-30% gains we see in the same piece of wood? I didn't think so!

well thats what you get for thinking. i will explain it, you pushing higher rpms with a big saw cutting wood to small for it. your a fake. false prophit if you will, making money off suckers. and your trying to defend your livlihood.

 

[STEVEGODSEYJR]

I wonder if BB will comment on Sling'rs other video 460 vs 372 ?

 

[BarkBuster20]

Yeah, I remember when I used to know it all.

Lets just just for the sake of you own edification here exactly why you think your stock 044 would out cut either odf those saws in ANY wood???? opcorn:


BTW just so BB knows whats up anyone here who has ever paid me a dime to mod a saw raise your hand.

why would you think my 044 wouldnt? and the reason i believe that is because neither of those saws will push as high of rpms in the cut in smaller wood that my 044 will.

 

[blsnelling]

lets see you put up some ####, i dont see slingr putting up any new vids of him testing the saws in real wood with real bars, why shouldnt he have to "prove" anything. brad you must have never cut doug fir. and i like how you just assume stuff.that fir demonstration was pathetic. and yes my 044 would hold more than a candle to those two saws IN THAT WOOD.

I may not have cut Douglas Fir, but I can guarantee you this, you've never run a properly modded saw or you wouldn't be sticking both of your feet in your mouth at the same time.

I understand what you're trying to say about the wood not being sufficient to really see the torque difference of these saws. But that does not discount the gains that are seen in this wood. Forther more, for you to even suggest that your 044 could dream of running with these saws is ludicrous. Obviously, you have no idea what a ported saw runs like.

 

[2000ssm6]

Yeah, I remember when I used to know it all.

I thought I did too, but come to find out I was right, I did.:hmm3grin2orange:

 

[Cedarkerf]

Im a long time stihl 044/460/066 User here in the PNW cut Doug fir 70-80% time seasond and green. Between 25-30" my 066 will out cut the 044. Some reason you got a chip on your shoulder normally ya seem all right kind a guy. In 30" wood my 372 ported cuts even with the 066. Just my observation. Going by your signature saw list have you spent much time running 066 side by side with 044.

 

[brucejr]

hey, never posted before but i've been quiet for long enough. MAKE A VID AND PROVE IT OR SHUT YOUR ###### MOUTH. everyone is tired of hearing you boast about your all mighty 044. how can you call every person who has replied to your comments morons.

sorry about the rant. i know its not the best way to introduce myself but i can't stand seeing honest, hardworking individuals such as sling'r and others getting $*@# on by arrogant people.

anyway............thanks for all the great vids sling'r and keep 'em coming

 

[BarkBuster20]

I may not have cut Douglas Fir, but I can guarantee you this, you've never run a properly modded saw or you wouldn't be sticking both of your feet in your mouth at the same time.

I understand what you're trying to say about the wood not being sufficient to really see the torque difference of these saws. But that does not discount the gains that are seen in this wood. Forther more, for you to even suggest that your 044 could dream of running with these saws is ludicrous. Obviously, you have no idea what a ported saw runs like.

i have run ported saws, wasnt impressed in the least. porters and modders, in my opinion your charlatins

 

[TheBeerGuy]

why would you think my 044 wouldn't? and the reason i believe that is because neither of those saws will push as high of rpms in the cut in smaller wood that my 044 will.

I see that you have almost eight hundred posts and am just wondering if 10of those add anything useful to any thread you have tried to hijack.

 

[STEVEGODSEYJR]

hey, never posted before but i've been quiet for long enough. MAKE A VID AND PROVE IT OR SHUT YOUR ###### MOUTH. everyone is tired of hearing you boast about your all mighty 044. how can you call every person who has replied to your comments morons.

sorry about the rant. i know its not the best way to introduce myself but i can't stand seeing honest, hardworking individuals such as sling'r and others getting $*@# on by arrogant people.

anyway............thanks for all the great vids sling'r and keep 'em coming

Thats one hell of a first post!!! Welcome to AS. Steve

 

[biggenius29]

Okay i will carefully explain everything, anyone who doesnt have the ability to understand this may as well just commit suicide, cause your a lost cause.
For one i never once said the husky was better or the stihl was better, that has nothing to do with what im saying. second off, which is my main point. that size wood, being doug fir (anyone who hasnt cut doug fir may as well keep there mouths shut) coupled with the size of the bar and chain on those 90cc saws, will not give you an accurate depiction of how powerfull either saws are, but of course all you modders support it, because a "modded" saw wont appear to have better preformance if its cutting the size wood its intended for. you juice a saw up and sink it in little softwood to try and make some money, your all pathetic. put a real bar and chain on that saw and sink it into real wood AND BACK UP YOUR WORK. your basicly false advertising. your making people believe the saw is getting more of an increase than it really is. anyway i expect a lot more stupid comments to follow this so bring it on. i know you modders are just trying to get more businus, how much you guys charge to MM and port a saw? bunch of ####in rip offs. spend the extra money and get a bigger saw itll do better. AND BIG SAWS ARE FOR BIG WOOD. morons.

On this side of the world you dont see much more than a 32" bar on a 660. A 36" is almost to big. You guys are in alot different wood than we are.

I can vouch for Sling'r, he does a awsome job. I finally got my carb tuned right on my 460 and it ate up a stock 660 and crapped it out.

I would like to see those two saws in some locust or oak.

 

[brucejr]

thanks stevegodseyjr.

and again, sorry i just had to get that off my chest.

 

[BarkBuster20]

hey, never posted before but i've been quiet for long enough. MAKE A VID AND PROVE IT OR SHUT YOUR ###### MOUTH. everyone is tired of hearing you boast about your all mighty 044. how can you call every person who has replied to your comments morons.

sorry about the rant. i know its not the best way to introduce myself but i can't stand seeing honest, hardworking individuals such as sling'r and others getting $*@# on by arrogant people.

anyway............thanks for all the great vids sling'r and keep 'em coming

dude why do you think i am bragging about my 044? that is totally off base, you idiots are trying to use the "044" as a smokescreen to my point. my point has nothing to do with the 044 even if i did make a video and my cut was faster it would mean NOTHING i run a 30 inch bar on the saw and it would be impossible for me to get the same diameter seasoned fir. your an idiot, nice job trying to jump on the bandwagon you little #####