tn fall gtg 460 build off date oct 1st

[Mastermind]

GTG at my house tomorrow night. Bring your 346s and your best chain! I'll get a .325 chain, or two, out and take it to any of your 3/8 chains JK Wish we could though!

Yeah I would enjoy that myself Brad.

That little saw sure got under my skin. I've already made a deal on one. The 026 is no longer my favorite 50cc saw, the 346 beats it hands down.

Unfortunately, that's the only one I found on cowroy's channel. It's not a fair fight for Wendell's saw anyway, with a semi-chisel chain. It did very well considering that. Next time, we'll have the tools to make the needed B&C changes, and we'll settle this

I was gonna put a better full chisel chain on it when I got to Terry's but ended up forgetting all about it when I heard all those saws running.

 

[blsnelling]

We can talk trash all we want here on the Web. We've got to get back together and do this right

1. Stock saw running:
a. 3/8 7-pin
b. .325 8-pin
c. .325 7-pin

2. Any ported saw running:
a. 3/8 7-pin
b. .325 8-pin
c. .325 7-pin

3. Your own saw with your choice of chain and sprocket.

 

[Mastermind]

We can talk trash all we want here on the Web. We've got to get back together and do this right

1. Stock saw running:
a. 3/8 7-pin
b. .325 8-pin
c. .325 7-pin

2. Any ported saw running:
a. 3/8 7-pin
b. .325 8-pin
c. .325 7-pin

3. Your own saw with your choice of chain and sprocket.

But talkin trash is fun.

I'm gonna be building my own in a few weeks. Murray, KY is about halfway. :msp_sneaky:

 

[wendell]

Besides this one
[video=youtube;GLxK74Iq1Ko]http://www.youtube.com/watch?v=GLxK74Iq1Ko&feature=player_profilepage[/video]

That didn't look too shabby.

 

[Mastermind]

That didn't look too shabby.

It runs good enough to put a grin on my face.

Let us know what you think of it when you get a chance to run it. :msp_thumbup:

 

[young]

iam ready for another gtg.

 

[wendell]

It'll be back home tomorrow but I probably won't have a chance to get it in wood until I get to Mitch's on Friday.

I need to pick up a 8 pin .325, a 7 pin 3/8 and a 3/8ths chain tomorrow to get ready for the test runs this weekend.

UPS will be delivering the Sugihara bar on Friday so as soon as it shows up, I'll be heading west.

 

[blsnelling]

But talkin trash is fun.

I'm gonna be building my own in a few weeks. Murray, KY is about halfway. :msp_sneaky:

IIRC, Murray is about 4 1/2-5 hours from here. I'd be tempted to bring the family down in the car Maybe the. OKI Diaper Posse would be up for a trip and we could car pool. Last weekend cost me right at $200! Most of that was in gas.

 

[young]

IIRC, Murray is about 4 1/2-5 hours from here. I'd be tempted to bring the family down in the car Maybe the. OKI Diaper Posse would be up for a trip and we could car pool. Last weekend cost me right at $200! Most of that was in gas.

ouch on gas. i spent $32 for the the around trip. spent more on raffle tickets :msp_razz::msp_razz:

 

[blsnelling]

Nearly 600 miles, 14 MPG, and have to run premium.

 

[parrisw]

Nearly 600 miles, 14 MPG, and have to run premium.

Well that's your own dumb fault for hot rodding your truck!!

That's why I like my Diesel.

 

[parrisw]

Unfortunately, that's the only one I found on cowroy's channel. It's not a fair fight for Wendell's saw anyway, with a semi-chisel chain. It did very well considering that. Next time, we'll have the tools to make the needed B&C changes, and we'll settle this

Semi Chisel isn't that bad. I can cut good too. I've been running it quite a bit the last two years, only cause I came across a bunch of it.

 

[blsnelling]

Well that's your own dumb fault for hot rodding your truck!!

That's why I like my Diesel.

Window sticker was probably only 17 MPG. I figure a 3 MPG loss isn't bad at all with 450-500 HP and 33" tires. Yes, aDuramax would be sweet!

 

[morewood]

You guys make me feel ashamed for admitting this, but the Jetta got :msp_w00t:51mpg:msp_w00t: on the way back. On another note, my dodge gets 20-21 on the interstate. It's worth it to have a diesel. Just thinking Brad, but next time you could leave your saws with Terry and then you wouldn't have to haul them around all that much:msp_tongue:

Shea

 

[parrisw]

Window sticker was probably only 17 MPG. I figure a 3 MPG loss isn't bad at all with 450-500 HP and 33" tires. Yes, aDuramax would be sweet!

Hmm, you figure 450-500hp?? That's a fair amount. My diesel doesn't even break a sweat at 700ft lbs. and get around 20mpg towing 5000lbs, well, depends on how I drive.

 

[blsnelling]

Hmm, you figure 450-500hp?? That's a fair amount.

At the crank. I'd love to see 400 at the rear wheels. My big tires might nullify that though. I built the engine from scratch, starting with a 6.0 LQ4. It has ported LS6heads, milled for 11:1 compression. Custom ground cam.......

 

[wigglesworth]

I had crap fuel (ethanol) on the way there and got 36, filled up before i left with non-ethanol and got 39 on the way back

 

[wendell]

The GTGmobile gets 65-75 mpg, depending how fast I go and if I can find a truck to draft. :hmm3grin2orange:

 

[srcarr52]

Hmm, you figure 450-500hp?? That's a fair amount. My diesel doesn't even break a sweat at 700ft lbs. and get around 20mpg towing 5000lbs, well, depends on how I drive.

Same here. My chipped 02 dMax (500hp, 700ft-lbs) gets 20mpg when I drive the speed limit. It goes down to about 18mpg when I'm driving 85mph, I average about 16mpg with mostly city driving. I also have 33" on it so that hurting it a little.

I'm going to put an AirDog unit on it soon because I'm having troubles with it loosing prime occasionally. I can't believe they didn't put a lift pump on these years and rely on vacuum to pull the fuel to the injection pump (10 in_mg). Anyway AirDog claims 1-2mpg but most people say 0.5mpg increase but less air to the injectors = longer life.

 

[mdavlee]

If you're running a pretty good tune you'll pick up power with the airdog.