dansikes116
ArboristSite Member
I have been trying to locate a seal puller like this on in the video: Chainsaw Seal Replacment & Vacuum Testing - YouTube anyone know where to get one of these? Or does anyone know a toll that works just as good?
Crank seal puller!
- Thread starter dansikes116
- Start date
Help Support Arborist Forum:
That's my video. You can only buy that puller from a Stihl dealer. Some dealers won't even sell them to you. They're very pricey too.
BILLSMOWERS
ArboristSite Lurker
this is the one in the video stihl p/n 5910 890 4400 seal puller i have ordered one my self
bill
bill
Now tell him what it cost! I know it was a lot, but don't remember how much.
BILLSMOWERS
ArboristSite Lurker
in the uk £115 still cheaper the damaging a crank or case
bill
bill
I believe that's like $180.
BILLSMOWERS
ArboristSite Lurker
Around that i would say .I have used my friends in the past but he got fed up with me asking so i ordered one for my self
bill
bill
Adirondackstihl
Flyz, Fuel & Fotos
$168.39 + tax
Adirondackstihl
Flyz, Fuel & Fotos
$12 for the seal & $6 for labor..........iffen you know the guy...and you've already removed the flywheel.
stinkbait
Addicted to ArboristSite
I just want to borrow a stihl puller long enough to get the dimensions and make my own.:msp_smile:
zogger
Tree Freak
Bushmans
Smoke Dragon Herder
Anyway to get them out without the tool? I have the clutch side out on my 044 but the flywheel side I just don't see a way without screwing it up.
There are multiple threads on the subject if you do a search.
I use a chain hoist and 7 lb. maul on those tough little flywheel side seals.
Last edited:
Zogs,
This is the one that has been suggested a few times here on A.S: < Lisle Corporation > (#58430 BACK SHAFT TYPE SEAL PULLER) - under $20 on a famous book selling website, or probably at your local NAPA dealer.
But I also like the one Fish recommends - Post #18 in this similar A.S. thread: < http://www.arboristsite.com/chainsaw/194407.htm >
Philbert
Bushmans
Smoke Dragon Herder
There are multiple threads on the subject if you do a search.
I use a chain hoist and 7 lb. maul on those tough little flywheel side seals.
Thanks. All I had was a 6 lb maul but it worked. After searching I discovered a way. It's not that I'm too lazy to search but the search feature is not that great for pinpointing things unless you get lucky. I had to read a hundred threads today looking for info. Not that I mind but when there's work to do I go for the quick answer if possible. Not that it matters now, none of the crappy dealers around here (3 of them) carry oil seals for an 044. Have to order them. Cheaper online anyways.
Thanks for the help
:rolleyes2:
I would stick with OEM seals from your dealer.
Bushmans
Smoke Dragon Herder
It might be cheaper to buy the complete set of gaskets for that model. It will include all gaskets and both crank seals.
Similar threads
