Take the 260 and buy a new 192 the 260 is $550 AND 192 IS $300 long as its his,
Paul
I replaced my turret bearing on my bucket truck this last weekend and it was not fun at all. First of all buying the damn bearing was three thousand bucks, getting the boom supported and lifted off the truck was no fun. Even more fun was trying to get the bolts out of the bearing on the top and the bottom halves with all of the retaining compound sucked. There was no room for an impact either. But after all I paid my buddy with pizza, beer, and 350 bucks, alot beter than paying the shop $8-10,000 that they quoted me. I hope i will never have to do that again!
I don't own a 440... The rakers are low, trust me, the picture is deceiving
While we were cleaning up the site, I decided to measure the fall zone of the biggest tree to see how tall it was. At first look I thought it was around 80 feet, after measuring from the stump to where the tip tops hit it turned out to be a little over 120 feet.
While we were cleaning up the site, I decided to measure the fall zone of the biggest tree to see how tall it was. At first look I thought it was around 80 feet, after measuring from the stump to where the tip tops hit it turned out to be a little over 120 feet.
You old guys make all the big trees look small!! :msp_wink:
Jeff
Well done.
I have found this app to be very accurate while the tree is still standing for measuring height as well.
New Height-Distance app
21 foot Silky saw held up to all the elements including winds up to 40 MPH.You must have clamped a piece of PVC to the trunk of the tree to hold that cow up there like that.
Enter your email address to join: