Best saw builders for high performance pro work saw

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
wigglesworth

wigglesworth

Booned
Joined
Oct 5, 2008
Messages
8,175
Location
West kentucky
Who builds the best high performance suspenders?????

y2unasa8.jpg

I miss that guy. :(

Don't miss the butt crack though. :laugh:
 
bryanr2

bryanr2

Addicted to ArboristSite
Joined
Dec 31, 2010
Messages
6,005
Location
Foothills of TN
That is a good question! I think
Randy,Terry,Scott are all at the
top of the game!! I think with them
3 it would all boil down to the chain
and the wood.


Careful- I mentioned them three among others on the first page and the thread went to hell.:hmm3grin2orange: should give us another 10 pages tonight though. :msp_thumbsup::cheers::popcorn:
 
Last edited:
RedneckChainsawRepair
Joined
May 11, 2012
Messages
9,402
Location
Ohio
Careful- I mentioned them three among others on the first page and the thread went to hell.:hmm3grin2orange: should give us another 10 pages tonight though. :msp_thumbsup::cheers::popcorn:

The rest is what gets the WORD out. ;)




[video=youtube;lsmXLGKdkW4]http://www.youtube.com/watch?v=lsmXLGKdkW4[/video]
 
Dan_in_WI

Dan_in_WI

Master rocket surgeon
Joined
Oct 11, 2012
Messages
403
Location
Wisconsin
As I indicated earlier, a large part of many gains likely come from the muffler mods and carb mods. Some of the porting work shown on here likely is (at least partly) counter-productive, even though the saw gained power after all was done. Of course it is impossible to prove what works and not, when several changes are made more or less at the same time.

unpossible

HTH:jester:
 
hoeyrd2110

hoeyrd2110

ArboristSite Guru
Joined
Jul 26, 2012
Messages
538
Location
Bucks Co. PA
wow my brain hurts after all this... i think the main question is what saw what use. then search for builds of that saw from the builders and pick each one and read it...pretty darn simple to me. i will say though don't just go for the most compression, go for the saw thats been dynamically balanced with porting and timing and all that stuff. the balanced saws have much more torque, you may sacrifice a few hundred RPM up top but u gain a whole 1000 rpm thats usable torque underneath. good luck with your pick!:rock:
 

Latest posts

Top