Interested, prices?
...Can someone say if a Husky large mount will fit a small mount with spacers they provide? or a Stihl bar fit a small Husky mount with spacers?...
I have a 24" Sugi in the Stihl mount. It came with two sets of spacers. One fits the large mount and one fits the small mount.
These bars are not cheap. The 20" bar looks like it going to run around $65 but when they last 2-3 times as long as the Oregon bar, especially when the Oregon bar runs $60... it's a no brainer!
These are Group buy prices that I'm using and they are not firm, it may turn out to be $70 a bar plus $12.50 shipping... that's $82 for a 20 bar, reduced weight, replaceable tip and last 2-3 times longer than an Oregon bar. And someone correct me, but this is equivalent to a Stihl ES or very close in price?
Would be interested in a couple of Bars. Could you post up some actual weights of the bars.
Any chance of a Husky Small mount 24" bar 3/8 .050 ?
Great.. but I think the bigger problem is finding a 16" bar in .325. They do sell tips in .325 but that would add another $15 to the bar price.
These bars are not cheap.
The good stuff never is, that's why it's good
watsonr is that 133.00 each let me kno. I may have figured wrong. I like their barsconsider your self tempted.
They are not running husky 16" small mounts any longer... However they do have one small husky bar in18" 3/8 and tomorrow i should have a price point for these. They told me that they don't move many and are are dropping a lot of bars. There is one bar on ebay that fits stihl and comes with spacers... That bar is being dropped as well (hard nose).
Can someone say if a husky large mount will fit a small mount with spacers they provide? Or a stihl bar fit a small husky mount with spacers?
I've talked with the owner of the company. He will order small mount husky in 16" .050 .325 if i can order 15 or more of that mount. Replaceable tip bars in reduced weight. He also said he'd consider the stihl in 16" as well if i order 15 or more, that's 16" .325 .050 replaceable tip for stihl.
15 of each... That's almost $2000 worth right there!
Speak up
I would like an 18" Husky small mount .325 for my 346. Also would like price on a 36" .063 Stihl mount for my 064.
Andy...
There are NO bars in .325 and why I'm asking if 16" will do. I've asked them to bring back a bar they have discontinued and there response was" if you buy 15 of them, then I'll do it". So that would mean picking a common size for everybody to choose, like a 16" .050 .325 in Stihl mount. Use the spacers to get it to fit a Husky small mount...... or buy it in 18" .325 Stihl mount and use spacers again. If I buy Husky small mount that leaves out the Stihl guys.
I don't get to choose one of each... its 15 bars in .325 of any length..... or nothing. The last option is everything is 3/8 and you buy a tip in .325 adding $15 to the cost of the bar. Oh, there are no bars in 16" length, only 18" in limited quantities and all of those are 3/8.
Andy...
There are NO bars in .325 and why I'm asking if 16" will do. I've asked them to bring back a bar they have discontinued and there response was" if you buy 15 of them, then I'll do it". So that would mean picking a common size for everybody to choose, like a 16" .050 .325 in Stihl mount. Use the spacers to get it to fit a Husky small mount...... or buy it in 18" .325 Stihl mount and use spacers again. If I buy Husky small mount that leaves out the Stihl guys.
I don't get to choose one of each... its 15 bars in .325 of any length..... or nothing. The last option is everything is 3/8 and you buy a tip in .325 adding $15 to the cost of the bar. Oh, there are no bars in 16" length, only 18" in limited quantities and all of those are 3/8.
Are small mounts not available any longer?
Enter your email address to join: