I buy it by the gallon and never a problem.
Echo PowerBlend
- Thread starter woodchipper95
- Start date
Help Support Arborist Forum:
You are going to get a lot of mileage out of this thread, and after a while it won't be about oil. Just use the best oil you can get and lots of it. (32:1)
MS460WOODCHUCK
Addicted to ArboristSite
Just pullin your chains. I know your health plays a big part in the amount of cutting you do.
SawTroll
Information Collector
Certainly, the last few years - the Aspen fuel surely isn't a limitation, even though it costs a bit more than pump fuel...
SawTroll
Information Collector
I really have nothing against Echo oil, except that I don't know much about it - I'm just messing around.....
woodchipper95
ArboristSite Guru
I read somewhere that Stihl did a test with a 362 with 20:1 and it ran like 38 seconds and then straight gas which was like 3 minutes. I like 50:1-45:1.
That's what I do. I run Ultra at 50:1. Of course, I'm an Unabashed Bottle Rinser (official club member), so that probably makes my mix closer to 45:1.
Since the 4-Mix engines don't like high oil concentrations, I just use one recipe for them and the rest of the 2-cycle equipment in my arsenal. Simple is better.
SawTroll
Information Collector
Well, more oil in the fuel does make the saw run leaner, unless the carb is adjusted accordingly...
tallguys
Addicted to ArboristSite
I've been using the Echo oil... and Stihl... not noticing any difference in any of my OPE.
Little Al
Addicted to ArboristSite
I guess in that case Troll, you are VERY rich, or you do not use your saw/s much, the price of that product in France there is no way I could afford to use it cutting the amount I do
l would use and trust Echo labelled oil more than Husky or stihl. There is too much money at stake for the big two brands who can put there name on an average product and people will pay extra for it. Its all marketing. Anyway l don't like FULL synthetic oil, all my gear starts and runs better with petrolium based stuff. Anyway these oil threads are pretty funny, when was the last time anyone suffered catostrophic failure due to poor oil.......it never happens, straight gas yes, but a failure due to oil is very very rare these days. l think its funny people pay so much for full synthetic 100% ester based oil thinking their OPE will benifit and have better protection as a result.....cleaner spark plugs/exhaust ports yes, better lubrication absolutely false.
The FD rating tells you what you need to know, the brand name is just marketing.
I'm presently using up some FC oil I got on clearance at MalWart, but will be going back to PowerBlend FD when it's done - it's readily available at a decent price.
PowerBlend is all my dad runs, at 50:1. His 455R has never been tuned and runs great - someday I will pull the muffler to look inside.
I'm presently using up some FC oil I got on clearance at MalWart, but will be going back to PowerBlend FD when it's done - it's readily available at a decent price.
PowerBlend is all my dad runs, at 50:1. His 455R has never been tuned and runs great - someday I will pull the muffler to look inside.
The Echo 2 stoke oil in Canada in dark blue so no problem here. I also like that it has stabilizer in it. I wonder if the Troll has even tried it. Humbug!
Little Al
Addicted to ArboristSite
The 2 types of Echo oil available locally to us, Semi Synth Blue, 100% synth Dark Red; Problem It is more expensive than the FD rated oil we use
woodchipper95
ArboristSite Guru
Just burned 3 tanks of Shell V-Power 93 octane E10 with Echo PowerBlend at about 46:1. Saw ran great, I like it! And the AutoTune of the 545 did amazing, maybe 3 cuts and it was all adjusted!
Firewood Fanatic
ArboristSite Member
The V-Power in the U.S has ethanol???? Here in Canada it is 91 octane and E-free.
inventtis
ArboristSite Member
I use Woodlandpro synthetic at 40:1 and have had no issues.
Yes. It's very hard to find non E fuel in the U.S.
D
Deleted member 83629
Guest
I was reading that stihl m-tronic saws are good for up to 25% ethanol wonder if the husky autotune is the same way?
