KG441c
Keith
Ya and I left the magnum spikes on.there before I shipped it to Mastermind! Hes probably cussing me!!
Mastermind Meets The MS362C-M
- Thread starter Mastermind
- Start date
Help Support Arborist Forum:
KG441c
Keith
What about if u ported the 361?
and we wait with baited breath...........
was there a disc in the video cam?
was there a disc in the video cam?
I know you have done this a million times Randy but what is the issue? You upload to YouTube then embed in the thread right?
FU xenForo!
FU xenForo!
hseII
Addicted to ArboristSite
5 tanks and remove the spark screen and she'll run with a 044
Sent from my iPhone using Tapatalk
Not Mine
My 044 that is
mopar1rules
ArboristSite Guru
Then the game changes. I have seen a video of Stumpy's 361 run pretty strong.
audible fart
MS390 OAK CZAR
Should've got an MS390.
KG441c
Keith
not!! i have a 461
audible fart
MS390 OAK CZAR
KG441c
Keith
lol!! na ill pass
Ron660
Addicted to ArboristSite
I used a ms390 to cut firewood for 8 years and never had a problem. Sold it for a larger saw. Wish I would have keep it.
KG, I have not been quiet, you just have not been looking in the right places. For the record, when I first broke the 362 C-M in, I thought it ran close to as good as my bone stock 044. Then I added a dual port muffler and K&N filter to the 044 and it is on a whole different level. (also moved the hi & low screws 1/8 turn out).
The 362 is lighter, smooth and cuts well, but it does not have the torque of the 044. For wood 15" or less I prefer the 362, for wood over 20" I prefer the 044. For in between, flip a coin.
Sorry if I built your expectations too high Randy, lets see what you can do with this thing.
(KG, aren't you glad he is not working on your camera?).
The 362 is lighter, smooth and cuts well, but it does not have the torque of the 044. For wood 15" or less I prefer the 362, for wood over 20" I prefer the 044. For in between, flip a coin.
Sorry if I built your expectations too high Randy, lets see what you can do with this thing.
(KG, aren't you glad he is not working on your camera?).
And for the record, I did report that my saw bogged easily until I ran about 5 tanks of fuel through it. The owners manual say break in is 5 - 15 tanks!
So if you are running a saw that has not yet been broken it, yes, it will run like a turd.
Hey, I offered to send my fully broken in 362 to you, but as I recall you were the one that did not have the time.
So if you are running a saw that has not yet been broken it, yes, it will run like a turd.
Hey, I offered to send my fully broken in 362 to you, but as I recall you were the one that did not have the time.
KG441c
Keith
Why has this turned into lets see if the 362 is a 044 or bigger saw?I bought the 362 as a 59cc saw and thats what it is . I bought this for my small saw to cut smaller wood and a 461 for bigger wood.
KenJax Tree
Terraphobic
Because if the thread doesn't go sideways or off topic by post #50 its not officially a Mastermind thread so we were working on it.
Sent from my iPhone using Tapatalk
KG441c
Keith
Oh ok!! ill shut up now!! Lol!! Seems to me though that theres alot of people here just waiting for the 362 to turn out to be a real turd??
KenJax Tree
Terraphobic
Nothing Randy builds is a turd
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Another effed up mastermind build thread. This is ghey.
KG, didn't you trade the 441 in on the 461?
