Mastermind Meets The MS362C-M

[bryanr2]

How does it compare, weight wise, with an old 028? Shoot out!

I betcha I know where theres a 359 that will solid spank this 362.

 

[Mastermind]

Another effed up mastermind build thread. This is ghey.

I'm pretty burnt out on this site.......it's probably showing in my actions.

I'll make another video in the morning and upload it in the house.

 

[KG441c]

KG, didn't you trade the 441 in on the 461?

Ya it was acting up on the hot start issue and dealer couldnt figure it out so he swapped it for the difference in a 461.I ask around opinions of another 441c, 461, or a 660 and everyone recommended the 461 and so far Im very happy with it

 

[big t double]

Nothing Randy builds is a turd


Sent from my iPhone using Tapatalk

ill bet if he eats a lot of burritos he can build a mean turd....im sorry, i felt like you set that up on purpose. I'm gonna go have another beer and go to bed. now i know why the guy is burnt out here....

 

[Stihl n Wood]

During break in period my 362cm bogged out under load like the first batch of 201T's! It's a hell of alot stronger now. Still breaking in... on tank 12/13 now. Still flush cutting small stumps it will bog down and I have to pull it out of the cut and clear it up, stick er' back in. But a half tank? Its gonna be very turd like indeed. overall I now am really liking it. Next is porting. But I wanted to break it in first. Im eager Randy, carry on buddy!! Thanks for the effort. I get burnt out coming on here at times. So props to you my friend...

 

[luckydad]

Ya it was acting up on the hot start issue and dealer couldnt figure it out so he swapped it for the difference in a 461.I ask around opinions of another 441c, 461, or a 660 and everyone recommended the 461 and so far Im very happy with it

You sent the wrong saw in to be ported. Just sayn.


Sent from my iPhone using Tapatalk

 

[Mastermind]

I'm sure there are very good gains to be had in the 362......

 

[KG441c]

During break in period my 362cm bogged out under load like the first batch of 201T's! It's a hell of alot stronger now. Still breaking in... on tank 12/13 now. Still flush cutting small stumps it will bog down and I have to pull it out of the cut and clear it up, stick er' back in. But a half tank? Its gonna be very turd like indeed. overall I now am really liking it. Next is porting. But I wanted to break it in first. Im eager Randy, carry on buddy!! Thanks for the effort. I get burnt out coming on here at times. So props to you my friend...

You sent the wrong saw in to be ported. Just sayn.


Sent from my iPhone using Tapatalk

that will come but I dont know if ill survive AS until then!!! lol

 

[Ron660]

I'm sure there are very good gains to be had in the 362......

Wonder if the 362 has the same exhaust flow into the transfer ports as the 461?

 

[7sleeper]

I'm pretty burnt out on this site.......it's probably showing in my actions.
.....

I have been expecting it for some time. I just want to thank you for your work sofar. I have learned a lot from you!

Thanks!

7

 

[jeff taswelder]

opcorn:opcorn:

 

[Mastermind]

I have been expecting it for some time. I just want to thank you for your work sofar. I have learned a lot from you!

Thanks!

7

The site has changed so much. Most of the old hands have moved on, and many of the ones that stayed just seem to enjoy arguing and contribute little meaningful content. There are a lot of new guys here, and that is the life of the site, thank God for them. I just hope that they don't pick up the bad habit of hostile debate from the few bad apples, and allow that to become the norm around here. At one time this site was so full of great information.......now when any subject is discussed it becomes a sounding board for the armchair know it alls that have little real experience with the matter at hand.

I still don't like this XenForo format either.

 

[Gologit]

The site has changed so much. Most of the old hands have moved on, and many of the ones that stayed just seem to enjoy arguing and contribute little meaningful content. There are a lot of new guys here, and that is the life of the site, thank God for them. I just hope that they don't pick up the bad habit of hostile debate from the few bad apples, and allow that to become the norm around here. At one time this site was so full of great information.......now when any subject is discussed it becomes a sounding board for the armchair know it alls that have little real experience with the matter at hand.

I still don't like this XenForo format either.

Well said.

 

[MustangMike]

Wonder if the 362 has the same exhaust flow into the transfer ports as the 461?

I don't know that answer, but the muffler is just a wide open tin can (no baffles).

 

[7sleeper]

The site has changed so much. Most of the old hands have moved on, and many of the ones that stayed just seem to enjoy arguing and contribute little meaningful content. There are a lot of new guys here, and that is the life of the site, thank God for them. I just hope that they don't pick up the bad habit of hostile debate from the few bad apples, and allow that to become the norm around here. At one time this site was so full of great information.......now when any subject is discussed it becomes a sounding board for the armchair know it alls that have little real experience with the matter at hand.

I still don't like this XenForo format either.

Your views and experience has been expressed by quite a few over the years, even before the new format was introduced. And yes I understand you very well.

7

 

[Ron660]

I don't know that answer, but the muffler is just a wide open tin can (no baffles).

Probably not then since it's mtronics. Really doesn't matter now, Mastermind will open it up like Moses did the Red Sea!

 

[Duane(Pa)]

The site has changed so much. Most of the old hands have moved on, and many of the ones that stayed just seem to enjoy arguing and contribute little meaningful content. There are a lot of new guys here, and that is the life of the site, thank God for them. I just hope that they don't pick up the bad habit of hostile debate from the few bad apples, and allow that to become the norm around here. At one time this site was so full of great information.......now when any subject is discussed it becomes a sounding board for the armchair know it alls that have little real experience with the matter at hand.

I still don't like this XenForo format either.

I seriously doubt if this is the total answer, but there is a sub-forum of hot saws that is modded work saws. There would be less traffic over there, but that may not be all bad, given some of the issues you have brought up. I have said this before and at risk of repeating myself, I don't want these guys pi$$ing you off to the point that you don't want to post anything. I want to learn something, not just argue with somebody.

Now FWIW, I ate a whole lemon sponge pie that the wife bought from the church ladies on Tuesday (by myself). It's been what, two days? My outlook has improved considerable. I haven't had any failed uploads but life aint' too bad....

 

[Mastermind]

I moved the video from the laptop to the desktop......now I'm trying to upload it again. If it fails again, I'll make a new video.

 

[Mastermind]

Finally.

 

[DanTheCanadian]

No kidding that thing I'd turd.