2 Stroke Oil (Cerma)

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Yeah, but a four-stroke head is going to look far different than a two-stroke head. Those in the know really can't mistake one for the other.
I believe its a mistake to think like that
Sometimes even a sharp eye can be had.
If you give me a few days (working 19 hour days) I will post up a picture and you can decide if its 2 cycle or 4 cycle
 
I believe its a mistake to think like that
Sometimes even a sharp eye can be had.
If you give me a few days (working 19 hour days) I will post up a picture and you can decide if its 2 cycle or 4 cycle
OK. I will be waiting on u .
 
+1 Welcome, Bob. Synthetic Stihl is good along with fresh 93 octane, preferable ethanol free. OH..... and be warned. Hang around this site too much and your 3 saws will turn into 30. The CAD virus is rampant.
how many saws do u have ?
 
i use this product mixed at 32:1 no smoke,stink or other problems and it is cheap it can be had at oreilly auto parts for 9.99 per quart and i run ethanol free gas.2011-lucas-oil-semi-synthetic-2-cycle-oil---.jpg
 
my son puts this Lucas motor oil in his truck. ….So you think I should give the 2 cycle oil
a try in my saws huh ?
I hope you mean that he uses Lucas motor oil in his truck, and NOT the Lucas 2 cycle oil

Yes, running Lucas 2 cycle in your saws @ 32:1 will give you all the lube you need, and keep the combustion area real clean.
I suppose you could get away with 40:1 as well, but I would rather give my equipment the added oil for lubricating with 32:1


Now, the moped might be oil injected, and I would have to see how it looks inside after running it to be sure.

If the moped is mix gas/oil in one tank, then its a home run !!
 
Back
Top