Anybody know how to get back in touch with Moody?

[fin460]

I just want to talk to Moody personally, but he refuses to talk to me directly, I want to know what parts/saws he still has, which ones run or don't, which ones he stole or sold, and I could go from there

Sent from my E6782 using Tapatalk

 

[stihl sawing]

I just want to talk to Moody personally, but he refuses to talk to me directly, I want to know what parts/saws he still has, which ones run or don't, which ones he stole or sold, and I could go from there

Sent from my E6782 using Tapatalk

That should tell ya something right there. Probably scared you'll knock him out.

 

[fin460]

I'm not that type of person, I'm slow to get mad, but I'm slowly getting very pissed.


Moody has always paid me back, and I think he will try to pay everyone he has wrong back, especially if I can take it personally, and push him. I just beg that he will read this and get a minimum wage job and pay people back, he can take a good job when it comes along.



Sent from my E6782 using Tapatalk

 

[Mastermind]

The RC Heli site I frequent has a feedback system where only the buyer can leave feedback....positive, negative, neutral and a comment. There has to be a link to the sale......like to where the item was advertised on the site........all feedback can be reviewed and edited by the mods of the site. Have a bad deal, report negative feedback on it. They also have a forum for scammers, rip offs, and stolen stuff. It's to alert people of a shady transaction. The feedback system if for VBulletin, but I'm sure someone can port it over to Xenforo or someone can write a mod for it. It works very well though. Here's a link to my feedback page: http://www.helifreak.com/itrader.php?u=163699

I've been a forum owner for close to 15 years and have done much mod/administrative work. I think deleting posts is just wrong! Moving that particular post to a hidden forum is one thing, but we never deleted. If someone is going to act like an ass, well then leave it for all to see. If it's that bad, move it to an archive forum, and discipline as necessary (week vacation, month, ect.) No mod or admin should be editing any other one's post. That's just wrong and bad for the site.

I think so too. There any many things that have happened here over the years that, because of deleted posts and even whole threads, the members should be privy to and will never see.

Make an ass out of yourself.........fine, it's right here forever to be read by all.

 

[HuskStihl]

On the topic of getting ripped off, i recently got hosed by james evans (HusqyStihl). Bought a 261/2 that was gonna come with a bunch of extra parts and a good bar and chain. Totally unusable aftermarket cylinder, totally smoked piston, totally smoked bar and chain and no extra parts is what showed up. I called him on it privately, he got beligerant, i responded privately again. Sent saw back with the promise of returned funds upon receipt of saw and he hasnt been on the site since. Saw was delivered to him october 10.

Just FY y'all's I, that ain't me! Not that I sell stuff.

 

[huskihl]

Just FY y'all's I, that ain't me! Not that I sell stuff.

Or me...damn posers

 

[Justsaws]

Customer
Date out
Date in
Bill of sale content
Comments

Vendor
Date in
Date out
Bill of sale content
Comments

Within reason on specs.
Business name, address and phone, email etc.
If I have to "pm" someone to find out where my stuff is going to be then my stuff would never ever be there.

 

[Mastermind]

Huh?

 

[Jacob J.]

Just FY y'all's I, that ain't me! Not that I sell stuff.

Those Unicorn Orgasms you sold me turned out to be Wombat Belches.

 

[Justsaws]

Huh?

A place on this forum that lists all of the people who pay for the privilege of being sponsors to put forth the information for potential customers that any business should have to publically display.

Name
Address
Phone number
Email

Beyond that a feedback system that allows in a formatted system the typical argued issues to be displayed by both the customer and business, with a small limited space for comments. Each review to be limited solely to the customer and the business under that business heading.

Trading post, same rules.

Accountablity is easier to achieve publically. I just searched some sponsors, some email addresses posted but only one phone number, some do not even give a ballpark area of business. Out of what I searched only one begins to look like they are not hiding in the Internet.

Should be part of the profile page in order to be a sponsor, same if you want to post in the trading post.

 

[Pud]

I think it would be interesting to hear from new members thinking about getting work done ,what would make them more confident about sending saws away and buying stuff of strangers .. Its kinda another language when u sign up and dont pick up on alot of things till u learn the lingo even more so if your new to forums ..

I actually joined as purely to get a saw ported by randy and wasnt worried About some thing bad happening at all its very obvious at least to me hes a proffesional both in skills and running a business .. Miller mod saws comes across they same way i reckon

Can the money go to a third party kinda like paypall till theres evidence of the work been done then be released ?

Any porters get cheques that bounce or saws that arrive with problems that have to be fixed and have a hard time getting money for it?
" ran fine went i sent it im not paying that your trying to rip me off"

 

[MarkEagleUSA]

Moody wants to make it right, but has no job, it will take him time...

If that's the case and he's serious, he needs to start now. Job or not, there has to be a way he can show he's sincere.

 

[CapitaineHaddoc]

Builder's reputation is one of the best warranty for me. I know that Brad, Randy and Carl (and a few others) are really proud of their reputations, and they have too much potential customers to loose if they mess with someone.

I never had the chance to deal with Randy or Carl, but I probably will in the next years, without hesitation. And I know Brad is not the kind of guy who will screw someone.

 

[WKEND LUMBERJAK]

You guys are slacking only a handful of posts overnight.

 

[ELECT6845]

I just want to talk to Moody personally, but he refuses to talk to me directly, I want to know what parts/saws he still has, which ones run or don't, which ones he stole or sold, and I could go from there

Sent from my E6782 using Tapatalk

If Moody still has customers saws (probably not) and you get them back, I will help with the shipping cost to get them returned to their owner.

 

[stihl sawing]

Just FY y'all's I, that ain't me! Not that I sell stuff.

We knew it wasn't you, Your wife would get tired of starting all those saws for you. besides, yer too handsome to be a thief.

 

[WKEND LUMBERJAK]

If Moody still has customers saws (probably not) and you get them back, I will help with the shipping cost to get them returned to their owner.

I would also pickup some of the shipping. If they can be recovered.

 

[Mastermind]

A place on this forum that lists all of the people who pay for the privilege of being sponsors to put forth the information for potential customers that any business should have to publically display.

Name
Address
Phone number
Email

Beyond that a feedback system that allows in a formatted system the typical argued issues to be displayed by both the customer and business, with a small limited space for comments. Each review to be limited solely to the customer and the business under that business heading.

Trading post, same rules.

Accountablity is easier to achieve publically. I just searched some sponsors, some email addresses posted but only one phone number, some do not even give a ballpark area of business. Out of what I searched only one begins to look like they are not hiding in the Internet.

Should be part of the profile page in order to be a sponsor, same if you want to post in the trading post.

At one time I had my phone number and email in my sig. It lead to new guys thinking I work for AS, and was just here to answer questions about their saws. It became a full time job just fielding calls. I'll never post my phone number on this site again......if that bothers anyone........oh well. My email in on my profile page.

I think it would be interesting to hear from new members thinking about getting work done ,what would make them more confident about sending saws away and buying stuff of strangers .. Its kinda another language when u sign up and dont pick up on alot of things till u learn the lingo even more so if your new to forums ..

I actually joined as purely to get a saw ported by randy and wasnt worried About some thing bad happening at all its very obvious at least to me hes a proffesional both in skills and running a business .. Miller mod saws comes across they same way i reckon

Can the money go to a third party kinda like paypall till theres evidence of the work been done then be released ?

Any porters get cheques that bounce or saws that arrive with problems that have to be fixed and have a hard time getting money for it?
" ran fine went i sent it im not paying that your trying to rip me off"

I've had two guys that were shitheads. That's not bad considering how many saws I've done over the years.

 

[Chris J.]

I think so too. There any many things that have happened here over the years that, because of deleted posts and even whole threads, the members should be privy to and will never see.

Make an ass out of yourself.........fine, it's right here forever to be read by all.

Recently one of the sticky threads underwent a major cleansing, which was not necessary IMO. The comments made should've been left for folks to read. I wonder if this comment will be allowed to stay.

 

[stihl sawing]

Gee that's not what's sitting on my desk.....

Thansk.

Ok BA,All I can say is..................More pics of her?