Ok.. like others, I'm low on saw stuff but I do have a little time and some rookie talents.
To this thread I offer square sharpening of up to 252 DL of 3/8 chain. The angles will be what I use as a work angle in the south east. That should get you 3 loops of 20",3 of 24/25" or 2 loops at 32", etc. .050,.058,.063 makes no difference. I'll clean the gullets and set the rakers at 0.025"
Now I've offered chain sharpening in the past and I have to offer a few guidelines:
- No frozen links or heavily rusted chains.
-If you send a chain that has lots of varying lengths of cutters, I'm going to even them up and then square them and you'll loose some cutter length. Same goes for "rocked" chains.. I can fix it but like any other sharpening, you are loosing the length.
-I can NOT square semi-chisel chain, chisel cutters only; LGX , RS, etc.
-Ship them to me in a small flat rate box USPS, I'll sharpen in 14 days (I have a very busy job and a family..shop time is hard to get) and I'll pay postage back.
In the spirit of the thread, I'd like this to go to someone that has NOT received a gift yet.. contact me via PM and I'll post back when it's claimed.
Some recent chains:
http://images.tapatalk-cdn.com/15/11/23/a8bee67f00423c07a18624951cb7ee99.jpg
http://images.tapatalk-cdn.com/15/11/23/dad1dd0fd2fc6193887dfffe508df320.jpg
http://images.tapatalk-cdn.com/15/11/23/a8bee67f00423c07a18624951cb7ee99.jpg