Here's one......get ya by....
https://store.chainsawr.com/products/jonsered-625-630-670-chainsaw-oil-cap
https://store.chainsawr.com/products/jonsered-625-630-670-chainsaw-oil-cap
Hi guys. Boy am I sad. Went for a quick firewood hit with my 9 year old today and took one saw and one only. My trusty Jred 630. It's been top dog of my arsenal this year. Big enough or small enough for whatever I'm cutting with only a 16" bar to boot! So I'm 30 minutes into filling up my gator with some 15" red oak rounds when I notice this:
View attachment 494569
My bar oil cap is long gone! I promised the boy a $5 bill if we could find it but I was cutting in swampy oak top bramble
and a needle in the proverbial haystack would have been easier. So I ask my Jred friends here...where do I find this cap for a 1983 jonsereds 630? I need my old trusty back! Thanks for any help! And eBay was a bust earlier btw
52 is a nice saw.....built just like a mini 621 or 80....heavy duty all the way. Closed port, double ring, high crown piston....points ign and coil is the same as the 621 & 80/90 and the 111s.....the 521E uses the same P&C/carb/muffler......if it isn't scored it might be worth throwing a set of seals and bearings and new rings and get 'er going...will run an 18-20" bar in .325 pretty good....
Man....I went looking for a new recoil cover sticker for the 490 tonight at the shop.....knew I had one but it wasn't in orderly my "Jonsereds" boxes with the rest of the NOS stickers......I went through 4 fairly large boxes of misc. NOS Jonsereds parts......bought in lots....have some really off the wall stuff.....some of it I don't even know what it is....found like six 910E intake elbows.....eight 621 air filter covers....a handfuls of throttle linkages another handful of triggers ....piles of recoil pulleys that fit god knows what.......did finally find the sticker I wanted in the bottom of box #4....all by itself.....sometimes I amaze myself with the **** I acquire.....I ain't right....
I am checking with chainsawr if this one works with my earlier model:Hi guys. Boy am I sad. Went for a quick firewood hit with my 9 year old today and took one saw and one only. My trusty Jred 630. It's been top dog of my arsenal this year. Big enough or small enough for whatever I'm cutting with only a 16" bar to boot! So I'm 30 minutes into filling up my gator with some 15" red oak rounds when I notice this:
View attachment 494569
My bar oil cap is long gone! I promised the boy a $5 bill if we could find it but I was cutting in swampy oak top bramble
and a needle in the proverbial haystack would have been easier. So I ask my Jred friends here...where do I find this cap for a 1983 jonsereds 630? I need my old trusty back! Thanks for any help! And eBay was a bust earlier btw
God bless ya Fossil! Do you know if that will work on my earlier model that has the saw wrench turnable style cap? I don't care if it's not a match as long as it works. Mines no shelf queen. It's a worker bee and proud of it. LolThe good news is that they are widely available new for less than $10
Original part 501 62 66-01 replaced by Husqvarna 501 62 66-02
http://www.stenspartswarehouse.com/Stens-610-330-p/610-330.htm
God bless ya Fossil! Do you know if that will work on my earlier model that has the saw wrench turnable style cap? I don't care if it's not a match as long as it works. Mines no shelf queen. It's a worker bee and proud of it. Lol
Hey thanks! I have a parts saw husky 350 in the shed that I'll make sure doesn't work tomorrow but will probably use your link.I have the IPL for both the early and later 630 (I have the early one like yours) and the cap is the same PN. The PN was superceded by the 501 62 66-02. Same PN as my 266XP and it fits in the 630 perfectly. The 630 is my go to firewood saw as well. Love it.
It has the slot in the middle of the cap for a scrench
Hi guys. Boy am I sad. Went for a quick firewood hit with my 9 year old today and took one saw and one only. My trusty Jred 630. It's been top dog of my arsenal this year. Big enough or small enough for whatever I'm cutting with only a 16" bar to boot! So I'm 30 minutes into filling up my gator with some 15" red oak rounds when I notice this:
View attachment 494569
My bar oil cap is long gone! I promised the boy a $5 bill if we could find it but I was cutting in swampy oak top bramble
and a needle in the proverbial haystack would have been easier. So I ask my Jred friends here...where do I find this cap for a 1983 jonsereds 630? I need my old trusty back! Thanks for any help! And eBay was a bust earlier btw
52 is a nice saw.....built just like a mini 621 or 80....heavy duty all the way. Closed port, double ring, high crown piston....points ign and coil is the same as the 621 & 80/90 and the 111s.....the 521E uses the same P&C/carb/muffler......if it isn't scored it might be worth throwing a set of seals and bearings and new rings and get 'er going...will run an 18-20" bar in .325 pretty good....
Man....I went looking for a new recoil cover sticker for the 490 tonight at the shop.....knew I had one but it wasn't in orderly my "Jonsereds" boxes with the rest of the NOS stickers......I went through 4 fairly large boxes of misc. NOS Jonsereds parts......bought in lots....have some really off the wall stuff.....some of it I don't even know what it is....found like six 910E intake elbows.....eight 621 air filter covers....a handfuls of throttle linkages another handful of triggers ....piles of recoil pulleys that fit god knows what.......did finally find the sticker I wanted in the bottom of box #4....all by itself.....sometimes I amaze myself with the **** I acquire.....I ain't right....
Hi guys. Boy am I sad. Went for a quick firewood hit with my 9 year old today and took one saw and one only. My trusty Jred 630. It's been top dog of my arsenal this year. Big enough or small enough for whatever I'm cutting with only a 16" bar to boot! So I'm 30 minutes into filling up my gator with some 15" red oak rounds when I notice this:
View attachment 494569
My bar oil cap is long gone! I promised the boy a $5 bill if we could find it but I was cutting in swampy oak top bramble
and a needle in the proverbial haystack would have been easier. So I ask my Jred friends here...where do I find this cap for a 1983 jonsereds 630? I need my old trusty back! Thanks for any help! And eBay was a bust earlier btw
Here's a nice early 90...........pretty clean....at least the shipping is realistic....LOL!!!!!
http://www.ebay.com/itm/jonsereds-90-chainsaw-/281984748924?hash=item41a799cd7c:g:RzEAAOSwgApW-qIO
Enter your email address to join: