- Joined
- Apr 28, 2014
- Messages
- 7,785
- Reaction score
- 10,438
I have some (1) High Temp gasket goop, some (2) JB Weld and lastly some of that over advertised (3) Flex Glue. Will one or other work, or something else to repair stripped threads in the Carburetor Flange of a Husky 350. I found that this flange was stripped when I was reassembling the 350 rebuild. The saw definitely has a leak, as it won't hold idle and bogs out in the cut. With a 3rd hand to hold the carb tight to the intake flange/boot it is a much better behaving saw.
I figure I will try this for a quick (permanent?) fix before ordering a part.
I figure I will try this for a quick (permanent?) fix before ordering a part.