Jkstihl
Chainsaws make me fap.
Are you talking about the saw??
We dont talk about those in here sir.
Are you talking about the saw??
Are you talking about the saw??
Today I messed with a 372xpw cylinder and rescued a stihl that has been mine for years.
Someone did guess right it is 440 I've ran it as a 440 440/064 then I had a little ooooops and now think it'll be a 440/046.
Not junk by any means but is on the back burner for now. I screwed up and didn't mean to post the little ic.
Heres the xpw cylinder before I got distracted by the sled
View attachment 790172
Then the sled a old work horse mtn max 600 updating it alittle with a bar riser kicked forward 15deg and raised 4". Also gutted the muffler. The 600run well with triple pipes and a good can neither of them I can afford so I cut and gut.
View attachment 790173 View attachment 790174
Pretty proud of the bar riser. But took a weight penalty so I took it out on the muffler
View attachment 790175 View attachment 790176
I do plan to get the 440 going this winter not entirely sure as what I've got a couple 44 cylinders I've ported that run pretty good a couple 46 cylinders to. I doubt I'll go the 064 piston route again.
The 440 is wearing some 046 plastic with inside gutted to clear the airfiter that's kicking around in the photo.
The 440 and 372 will be fighting for the 28" I used to be alittle stih biased even though I always ran but kinda wondering if I might like the orange antivibe and they seem to run just as well. I may need a 70cc saw running in the next few months maybe.?
View attachment 790178
One more distracted photo. Snow is hitting idaho late. But is finally good up high.
View attachment 790179
Ahhhhhhh I see, Okk, you can tell I’m pretty green here. Thanks for clearing that up! That’s hilarious
I've been on this forum like 20 years. But I feel green
I'm just messing around. Making a bsing thread. I guess I could get banned for it **** they've done that before guess I'll just go away for another 5 years if that happens.
Nahh, I am a fairly new guy that has never been banned before!!!Ahah, HarleyT was correct then, it’s funny how you know each others subtleties like that. I suppose Harley must have been here for a fair while too!
Nahh, I am a fairly new guy that has never been banned before!!!
Oh haha that’s fair enough you got a suspensionI think once was putting up a pic of a naked gypo-logger...
Had a 700 Nitro for a few yrs . Nice Trail Sled not quite as good in powder . I just finished a 700 SKS Liberty rebuild c/w 2" paddles for some Mountain riding later this March , enjoy the Snow Bud !I may have a need for a 90cc again someday. Kinda wishing I didnt let the ones go that I had. I'll hang onto the 70 and 90cc stuff.
I'll like give or throw the 020 away. I don't have use for it even if it was a running saw.
With my welder in the truck it sticks out always. The ramp is the deck and goes in the receiver .
View attachment 790190
I'd love to have a 650 with a cat motor.
I'd put it to use doing more than dragging a sled around
Had a 700 Nitro for a few yrs . Nice Trail Sled not quite as good in powder . I just finished a 700 SKS Liberty rebuild c/w 2" paddles for some Mountain riding later this March , enjoy the Snow Bud !
Enter your email address to join: