Is that the saw you got at the GTG? Glad to see ya got it running.
It sure is! Thanks to
@kuhndog for hooking me up with it! He told me it was to start with some ether, so I took her home, cleaner her up, pulled the old felt fuel "filter" and cut an 1/8" off the end and stuck it back on. With some coaxing it was able to start reliably, but tuning the carb was like trying to walk up an escalator backwards. Ended up putting a modern fuel filter on it, new fuel line, and rebuilt the carb with new kit, and spark plug. Found a handle guard to replace the missing one and then put a set of bucking spikes on it, then put a new 20" bar on it. The old 18" needs to be re-profiled, the grooves are pretty worn down and several areas. She cuts good now, though sometimes has some trouble on a cold start. Can't find air filters for these anymore, so I just clean it with mild soapy water, rinse and then let dry.
I'm going to have to sneak up there, I don't remember the yellow saw.
It's a fairly new acquisition, the oldest, but the coolest saw I own. Hey
@rarefish383 — I've got a makeshift throwing gallery up. Was chucking a cheapo 3.5 lb double bit at it with good success. Was about to cut the handle down to 25" until it snapped off during a throw...