Labor Day weekend is the Cedar Valley Engine Club event about 50 miles north of my home. I was invited by Ron Olson (met Ron at the Iowa GTG last spring) to come this year and bring a few saws which I was happy to oblige.
The club has a few saw on permanent display (hanging from the ceiling or wall), Ron brought a nice selection of his Homelites and a Mono that he's restored, I brought mostly McCulloch saws and the other GTG models...KMS4 and Solo twin as well as the BP-1 and the Poulan 54 I recently got cleaned up. We ran a few this afternoon and will run a few more tomorrow just for good measure.
![20210904_100048.jpg 20210904_100048.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/612/612385-9da7c49ac5d5ee119406d3e0cc37e310.jpg)
![20210904_100057.jpg 20210904_100057.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/612/612386-4966a2f7c50fb92eca141c8fbeabee3c.jpg)
![20210904_100117.jpg 20210904_100117.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/612/612387-8b67c2c64d0a3bd297b298b7d0335f9c.jpg)
![20210904_100131.jpg 20210904_100131.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/612/612388-0064f2b27d922b588df488af857db54f.jpg)
![20210904_100143.jpg 20210904_100143.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/612/612389-ff133f925120ebdce18ef074dba4776e.jpg)
![20210904_100156.jpg 20210904_100156.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/612/612390-61d93d9eb6433a0b96a38bed6b8e0448.jpg)
I may even try to strike an arc with the welder tomorrow if we can find a scrap of steel to work with.
We share space in a building with a 3,300 In3 three cylinder two stroke Fairbanks-Morse crude oil diesel engine.
![20210904_095827.jpg 20210904_095827.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/612/612391-70be20f863506fb70661247d3d6b8206.jpg)
Mark
The club has a few saw on permanent display (hanging from the ceiling or wall), Ron brought a nice selection of his Homelites and a Mono that he's restored, I brought mostly McCulloch saws and the other GTG models...KMS4 and Solo twin as well as the BP-1 and the Poulan 54 I recently got cleaned up. We ran a few this afternoon and will run a few more tomorrow just for good measure.
![20210904_100048.jpg 20210904_100048.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/612/612385-9da7c49ac5d5ee119406d3e0cc37e310.jpg)
![20210904_100057.jpg 20210904_100057.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/612/612386-4966a2f7c50fb92eca141c8fbeabee3c.jpg)
![20210904_100117.jpg 20210904_100117.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/612/612387-8b67c2c64d0a3bd297b298b7d0335f9c.jpg)
![20210904_100131.jpg 20210904_100131.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/612/612388-0064f2b27d922b588df488af857db54f.jpg)
![20210904_100143.jpg 20210904_100143.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/612/612389-ff133f925120ebdce18ef074dba4776e.jpg)
![20210904_100156.jpg 20210904_100156.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/612/612390-61d93d9eb6433a0b96a38bed6b8e0448.jpg)
I may even try to strike an arc with the welder tomorrow if we can find a scrap of steel to work with.
We share space in a building with a 3,300 In3 three cylinder two stroke Fairbanks-Morse crude oil diesel engine.
![20210904_095827.jpg 20210904_095827.jpg](https://cdn.imagearchive.com/arboristsite/data/attachments/612/612391-70be20f863506fb70661247d3d6b8206.jpg)
Mark