mikejudi
New Member
Got it Running Good
Finally got around to working on the 026. First thing was to replace the fuel line. Just for the heck of it, I purposely did not replace the in-tank filter. Pulled about 7 times and it fired right up. Cut for about 15 minutes to test and no issues. The fuel line must have had tiny cracks or been deteriorated inside. Couldn’t really tell by looking at the outside of the line, it looked fine. I even cut, sliced, and examined the old line. Couldn’t see anything obvious. Anyway without you guys’ help, I’d still be struggling. Thanks for all the attention, manuals/diagrams, and getting me back to cutting. Winters a coming. Thanks much again.
Finally got around to working on the 026. First thing was to replace the fuel line. Just for the heck of it, I purposely did not replace the in-tank filter. Pulled about 7 times and it fired right up. Cut for about 15 minutes to test and no issues. The fuel line must have had tiny cracks or been deteriorated inside. Couldn’t really tell by looking at the outside of the line, it looked fine. I even cut, sliced, and examined the old line. Couldn’t see anything obvious. Anyway without you guys’ help, I’d still be struggling. Thanks for all the attention, manuals/diagrams, and getting me back to cutting. Winters a coming. Thanks much again.