doc874
Addicted to ArboristSite
Got this 041 farmboss that i can't seem to keep from flooding, i installed a new carb kit and have adjusted the diaphram pin arm up-down and all around with no luck. The saw will start and run once i drain the excess mix out, it will run until the small amount left is burnt. I've installed new rings and also new seals on the oil pump because, when it came to me it felt like it had 1000psi due to bar oil leaking into the cylinder. Not sure what to try next. I have changed the fuel lines and added a Stihl fuel line as the impulse hose ( could that be why it floods?) Great saw if i can only get it setup right. Maybe the carb is toast?