181 trigger problem

[UnTaking]

So I have a 181 se that runs great but then the trigger gets stuck I can unstick it if I push on the throttle lock but when I give it gas it just gets stuck again. So I was just wondering if I can still buy a new one or some how fix or even take it out.

 

[RedFir Down]

I had this happen years ago on a 181 I had. I took the trigger out and it looked like a piece of the operator presence lever was floating around in there making the trigger stick.
I cleaned it out and installed a new lever and no problems since.

 

[Wood Doctor]

I also repaired one of these with a new trigger. It's not the best of designs. Too much stress on plastic parts.