DPDISXR4Ti
ArboristSite Operative
I was sorta half looking for a second Husky, if only to have as a "hot standby" when I frag a chain and need to finish a job. A "parts only" 55 showed up on Craigslist, and it was mine shortly thereafter for $20.
Compression is 30 psi, so clearly it needs a rebuild. I see 45 and 46mm kits available - I presume I go with a 46, yes? At $33 this kit looks like a good value as it includes many of the gaskets and seals....
https://www.ebay.com/itm/46MM-Cylin...737902&hash=item43d66e1ad6:g:nVsAAMXQH6BRETIv
Other needed things are a muffler and drive sprocket. I'm a little confused looking at the clutch drum/drive sprockets for sale as there appear to be two different sprocket configurations. One is star-shaped and the other just has 7 square teeth sticking up. But both listed as being for the 55. Help?
As for the muffler, suggestions?
Anything else I should be replacing?
Compression is 30 psi, so clearly it needs a rebuild. I see 45 and 46mm kits available - I presume I go with a 46, yes? At $33 this kit looks like a good value as it includes many of the gaskets and seals....
https://www.ebay.com/itm/46MM-Cylin...737902&hash=item43d66e1ad6:g:nVsAAMXQH6BRETIv
Other needed things are a muffler and drive sprocket. I'm a little confused looking at the clutch drum/drive sprockets for sale as there appear to be two different sprocket configurations. One is star-shaped and the other just has 7 square teeth sticking up. But both listed as being for the 55. Help?
As for the muffler, suggestions?
Anything else I should be replacing?