Jacklefty
ArboristSite Operative
Hello! I’ve got an ms 460 that I recently rebuilt and did a small bit of Porting to( widened transfers and exhaust port). It’s got a highway pop up piston. With caber rings, oem crank seals, aftermarket 2 port muffler and a base gasket delete. It’s got really good compression and will only get better.
**** sorry for not mentioning this but the bar on it is worn out and not worth really cutting with . The tip was seized with rust before I soaked it in PB blaster so I am not going to include it in the sale just because it’s a crappy bar*****
I ran about 3 tanks of hr1 50:1 through it. It’s really not my thing so I wanted to pass it on. Here’s a videoof it idling. I didn’t have any wood to put it in.
SPF!!! PHO plus shipping lower 48
**** sorry for not mentioning this but the bar on it is worn out and not worth really cutting with . The tip was seized with rust before I soaked it in PB blaster so I am not going to include it in the sale just because it’s a crappy bar*****
I ran about 3 tanks of hr1 50:1 through it. It’s really not my thing so I wanted to pass it on. Here’s a videoof it idling. I didn’t have any wood to put it in. SPF!!! PHO plus shipping lower 48
