Manugoss
ArboristSite Member
Husqvarna 266xp with 272 xp piston and cylinder. The project is not finished. OEM used piston and cylinder. 160 psi, new crank bearing, new gaskets etc. I worked on this project 7-8 years ago but was never able not get running it well. Would start but would not run. I believe the impulse hole in the gasket does not line up correctly. Can include 20'' bar and chain.
The minus:
- Crack in the top cover and clutch cover
- Fuel hose is to be changed
- missing 2 cover bolts
- front cover thread is damaged, See pictures. Might be the worst one
- spark arestor on the muffler is missing
Everything else should work.
150 USD + Shipping or best offer
The minus:
- Crack in the top cover and clutch cover
- Fuel hose is to be changed
- missing 2 cover bolts
- front cover thread is damaged, See pictures. Might be the worst one
- spark arestor on the muffler is missing
Everything else should work.
150 USD + Shipping or best offer
