272super
ArboristSite Operative
I have a project 372xp that has a vibration issue. I got it back together and noticed a noticeable vibration especially when you let off the throttle. It's feels like a pulsating from the crankcase. I though it must be bearings,so I replaced them and that did not help. I can easily feel it when I'm revving the saw a bit,like when it's warming up. The crank does not appear to be bent or damaged but I don't have a way to measure tolerances. Does this sound like a bad crank? I'm thinking the clutch side might be slightly bent and causing this issue.The saw runs good otherwise,but I need to rectify this. Thanks
Last edited: