You guys SERIOUSLY still carry on lengthy threads about saws....???
Y'all need to get a life. All this serious postin' is for the birdz....
Y'all need to get a life. All this serious postin' is for the birdz....
Careful Monkey..........some prick use to ban me everytime I typed the same character four times. Now I just call him a prick.I'm going back to muh ax. **** these damn chainsaws.
Just hoping you can learn about em so you can port one that will work for more than an hour!We got no mods that are pricks here these days Hamish. No worries my friend.
Just so everyone knows.......I'm having some serious fun riling up these Autotune lovers.
Just hoping you can learn about em so you can port one that will work for more than an hour!
no intention on starting a saw war, but from my old MS250 Stihl manual -"A factory new machine should not be run at high revs (full throttle off load) for the first 3 tanks".
I get the difference between on and off load, but finding a hefty sized 3 minute minimum cut log to bite into will still likely mean at least a couple of lifts of the saw from the cut during the exercise - i.e. Doing the 562XP's break in procedure trying to not drop below 8000 RPM will prolly entail some scream 'off load', unless you've got 80" trees in your back yard.
Hooray bologna saws!!!!Ahhhh bologna!!
It should and 10 foot oak, pez dispenser and sunglasses.Does it come with a sawmill attachment?
How did you run your 346 for the first time?
Sent from my Autotune Carb
that's 3 - 5 minutes of full throttle under load in the wood . not just screaming wide open no load.
I agree 100% Terry, even up here in my igloo the same thing happens. Be a good dealer, understand the product, know how to fix the product. Where are the dealers that cant even do a simple vac and pressure test? They are not on here (well some might be trying to figure it out). You as a dealer will be the one to sell and service the product. That's were it changes. Some of mother oranges stuff I refuse to sell. I sell and service AT saws, I refuse to sell junk. Wait till more MT's get in the market the same thing will happen.my concern is that there are guys that take this stuff as gospel they heard here and I have had several customers change there mind about buying saws after these auto tune threads got going. im not the only dealer that has had this happen.
Enter your email address to join: