50 parts gas to 1 part oil.
661 Oil Test 32:1 vs 40:1 vs 50:1 ?
- Thread starter redbull660
- Start date
Help Support Arborist Forum:
Adirondackstihl
Flyz, Fuel & Fotos
And 32 is more than 40
redbull660
Addicted to ArboristSite
ok boys and girls! Looks like today is the day!
changed things slightly. I'll be doing
32:1 belray h1r
vs
40:1 belray h1r
vs
50:1 belray h1r
vs
40:1 stihl ultra syn
vs
50:1 stihl ultra syn only had 4 gas cans so this one is in a 1 gal water jug that is DRY as a bone, don't worry.
bought and mixed this morning all from the same pump same time. 92 oct eth free.
test saw - 661R
bar - tsumura 36" .063 .404 pitch
chains - (5) New Stihl Rapid super full comp .404 (36" .404 .063 104DL)
changed things slightly. I'll be doing
32:1 belray h1r
vs
40:1 belray h1r
vs
50:1 belray h1r
vs
40:1 stihl ultra syn
vs
50:1 stihl ultra syn only had 4 gas cans so this one is in a 1 gal water jug that is DRY as a bone, don't worry.
bought and mixed this morning all from the same pump same time. 92 oct eth free.
test saw - 661R
bar - tsumura 36" .063 .404 pitch
chains - (5) New Stihl Rapid super full comp .404 (36" .404 .063 104DL)
Moparmyway
Its just a saw
- Joined
- Dec 2, 2012
- Messages
- 2,481
- Reaction score
- 3,399
Cant wait to see the results ................
Let me know if you need someone to help take the chains off your hands when you are done.
I'm anxious to see the results as well. Yes, there are plenty of variables, but your tests have shown some consistent results. If you're crazy enough to do the tests, I'll enjoy the results
KG441c
Keith
Whats takin him so dang long???I'm anxious to see the results as well. Yes, there are plenty of variables, but your tests have shown some consistent results. If you're crazy enough to do the tests, I'll enjoy the results
Mastermind
Work Saw Specialist
Belray should not be used at less than 32:1 in any engine under 125cc.
Read the jug sir.
big t double
Addicted to ArboristSite
If you're crazy enough to do the tests, I'll enjoy the results
crazy doesn't even begin to describe this guy
KG441c
Keith
I switched back to H1R
Mastermind
Work Saw Specialist
Me too.
I don't understand that. How is one ester based synthetic oil ok at <32:1 in a chainsaw and another not? Would be a great question for Belray. Anyone asked? I have not. Just thinking out loud.
Me 3, after you showed me that picture of the piston, in my 13 tank 661, that was only ran with Stihl Ultra @ 40:1 with 91 E free gasoline.
I am not going to use Ultra anymore.
Moparmyway
Its just a saw
- Joined
- Dec 2, 2012
- Messages
- 2,481
- Reaction score
- 3,399
Post it up for us to see ??
CR500
Diesel, Snowmobile, & Chainsaw Technician
Can not wait for some results.... have to visit the other test thread
Sent from my non internal combustion device.
Sent from my non internal combustion device.
As long as Randy does not mind,, here it is.
12 full tanks were ran threw the saw, and I dumped most the 13th one out before shipping. 40:1 Ultra, 91 E free gas.
I have little over 20 tanks on my 441, with Belray mixed at 32:1, looks nothing like that, not even close!!
..
Mastermind
Work Saw Specialist
Mastermind
Work Saw Specialist
Moparmyway
Its just a saw
- Joined
- Dec 2, 2012
- Messages
- 2,481
- Reaction score
- 3,399
I am getting sloppy with a lot more than my files in my old age .................
I talked to a dude on here who has been runnin 40:1 H1R i his ported 441c for years without issue and he runs his saw quite a bit..i just mixed 32:1 because thats what the bottle said..idk..this stuff confuses me.
I would love to see the piston cleaned up and then after another 12 tanks on H1-R.
