661 Oil Test 32:1 vs 40:1 vs 50:1 ?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
What did redbull run? 42to1?

I don't have any details.

If anyone is wondering why I bowed out of this thread the other day........

I just hated the way some folks were treating each other. We can do better.

This testing of RedBull's has been a real eye opener. I was convinced he was wacked out when he announced his results. But it appears that I was wrong.
 
I don't have any details.

If anyone is wondering why I bowed out of this thread the other day........

I just hated the way some folks were treating each other. We can do better.

This testing of RedBull's has been a real eye opener. I was convinced he was wacked out when he announced his results. But it appears that I was wrong.
Ya folks have a way of tearing each other apart around here? His test was an eye opener wasnt it? That yamalube , k2, lucas, and thinner oils should do well at 32to1
 
This testing of RedBull's has been a real eye opener. I was convinced he was wacked out when he announced his results. But it appears that I was wrong.[/QUOTE]

Takes a real man to make a statement like this. I've had to do this a few times. I respect this statement.

....and yes, we are all better than some of the degrading posts. We'll said MM.
porsche.
 
Could be.......but they normally ran good till they got to 10 hours or so. And on a lot of different oils. The ones that I ported aren't the only ones that had the bog issues either.......
ok then i guess that rules that out you willing to try 32:1 with some lucas? i have been using it since last september and it burns super clean and leaves everything oily inside.
and it pretty cheap. me and chris ( kendaxtree ) is hooked on it.
 
ok then i guess that rules that out you willing to try 32:1 with some lucas? i have been using it since last september and it burns super clean and leaves everything oily inside.
and it pretty cheap. me and chris ( kendaxtree ) is hooked on it.

I'm gonna use the rest of this Yamalube.......then I'll try a few quarts of Lucas. From what Matt says, I'm pretty sure I'll like it.
 
Excellent. I'm liking the sounds of that Motul 710 too. It has an ester base, but is a synthetic mix with a lower flashpoint. It might be the ultimate OPE oil. Who knows!
Motul 710 has a similar viscosity as other "chainsaw" oils. That would be a good test between 710 and 800 at 32:1 and 40:1.
 
Did someone say oil? Here's what I have on hand, with a bottle of Motul 710 on the way.

2T%20Oil%20Assortment-L.jpg
 
Just got back. 1:30am. left at 3:30am yesterday lol . I haven't even checked the footage. I know it was close. I'll upload in the morning. I did cuts and Hedgerow did cuts. 2 diff logs.


Took some other vids of other guys running various ported saws. Did some other tests as well. Can't wait to look at the footage but im dead tired.
 

Latest posts

Back
Top