hoss
Addicted to ArboristSite
Yes richening it up a bit for milling never hurts.
880 is hitting rev limiter at 10,800
- Thread starter Trigger-Time
- Start date
Help Support Arborist Forum:
Yes richening it up a bit for milling never hurts.
RED-85-Z51
Addicted to ArboristSite
Mostly by it's operator.
(man that was to easy)
No its supposed to be limited by the choke/air vane...now it is limited by the fact the Breakerless ignition has gone out.
I have a good TS-350 to swap the coils, also now have a Spare Tilly HL-166A.
Anyone ever swapped a big Tilly onto a stock saw, like say a Tilly 314G?
Trigger-Time
Addicted to ArboristSite
Took Lake's advice, taped tach to saw. In cut, she was running
8,000 rpm
Cut some Bur Oak Cookies
Yup, idle is little high.........
8,000 rpm
Cut some Bur Oak Cookies
Yup, idle is little high.........
Lakeside53
Stihl Wrenching
8K in the cut for decent sized wood is fine.....
Trigger-Time
Addicted to ArboristSite
Thanks..............just wanted to be sure, didn't want to mess it up, right off.
Gary
Lakeside53
Stihl Wrenching
So.... do you like it?
Trigger-Time
Addicted to ArboristSite
Yes Sir..........to tell the truth, still a little nervous with it.
but that's how I was going from 036 to 460 and then
again when moving up to 066.
Lakeside53
Stihl Wrenching
lolol So.. what's next?
Trigger-Time
Addicted to ArboristSite
:hmm3grin2orange: :hmm3grin2orange: :hmm3grin2orange: :hmm3grin2orange:
You ask me that a couple years ago when I bought 460, I never in
my wild's dream's......................
Tzed250
Addicted to ArboristSite
Trigger-Time
Addicted to ArboristSite
Tzed250
Addicted to ArboristSite
Will go 090, before I go their
Soon it will be about the same money...:hmm3grin2orange:
Trigger-Time
Addicted to ArboristSite
If I add anything else.........It will have to fall in my lap and be
CHEAP, CHEAP, CHEAP!!!!!!!!
Tzed250
Addicted to ArboristSite
Trigger-Time
Addicted to ArboristSite
There went the bikesaw and the 090...
Bike saw yes.........but you never know when you mite come across
070 or 090. I have lot of :Eye: :Eye: out their looking.
Tzed250
Addicted to ArboristSite
Bike saw yes.........but you never know when you mite come across
070 or 090. I have lot of :Eye: :Eye: out their looking.
I know where an 090 for sale is...not to bad a price either...I passed on it earlier this year...
Lakeside53
Stihl Wrenching
Enabling my only role.. the choice is yours :greenchainsaw:
Lake is there a particular model of 088/MS880 that is best for my use? I would use it falling and bucking redwood and fir. It would not get alot of use but I want to be able to run a 4' bar and 404 chain, mostly for redwood. Or would I be better off with an 084 or an 090? Let's pretend cost is not an issue and that my wife will never find out.
What is important is availabilty. I will need to make this purchase in the next week or 2.
What is important is availabilty. I will need to make this purchase in the next week or 2.
Lakeside53
Stihl Wrenching
There is only one model of MS880 available... with a few bar options. iFcost is not an issue, buy new.
The 084 is hard to find in good shape (and parts...), and the 090.. well, if you like antiques..
The 084 is hard to find in good shape (and parts...), and the 090.. well, if you like antiques..
brncreeper
Addicted to ArboristSite
I like my 088, it handles a 41” bar with 404 chisel chain just fine. RPM’s are right around 12,300, it seems to like it.opcorn:
opcorn:
