CHEVYTOWN13
Addicted to ArboristSite
Since I have the saw apart to check for the problem with a lead, I advanced the project in the jug area by increasing the area; as was done to the 5100. The 5100 runs good, so I thought I'd give it another shot here. The other jug will have a traditional finger porting but without widening the intake port to blend it more with the transfer duct area. Whichever one flows best will be bolted to the saw.
Beginning the port for more area.
Using a stone to smooth things out.
You get an idea as to why they call it a finger port.
Working the transfer duct area. I believe there is more work there, but I stopped for now.
Comedy and Tragedy
Stocker.
Beginning the port for more area.
Using a stone to smooth things out.
You get an idea as to why they call it a finger port.
Working the transfer duct area. I believe there is more work there, but I stopped for now.
Comedy and Tragedy
Stocker.