I purchased one similar to it (though I don't know the weight) with a yellow handle. I much prefer my wooden handle mauls over it, as they don't get stuck as often, and tend to split wood much easier. The wedge portion on this seems to be too pronounced.
I do tend to go through wooden handles and they are getting expensive to replaced, so my wife recently purchased a yellow fiberglass handle for my maul head, but was very disappointing in the mounting method... they provide you with some grey gummy stuff to fill the bottom, and two double packs of epoxy to fill the top with. Well, the handle was standing upright by my stocking Christmas morning with gooey epoxy dripping down it. So I got right to putting the head on...sealing the bottom, holding it up to a light to see if I sealed it adequately... pouring in the mixed epoxy...then dealing with the epoxy which seemed to continuously leak through somehow... After adding much duct tape, I set it outside to leave it's mess out there. The next day I added more epoxy which I purchased separately to fill the voids left by the leaking epoxy. It's not pretty, but I'm looking forward to trying it. Oh, another thing, I noticed that even though it claimed to be the same length as the wooden handles, it's not! Apparently they measured the full length of the handle, whereas the wooden ones are measured up to the blade!