Guido Salvage
Supreme Saw Whoreder
Does anyone sell 4" Torx drivers in 1/4" or 3/8" drive? I can find short ones and the longer hex ball drives, but not Torx.
Anyone sell 4" Torx drivers?
- Thread starter Guido Salvage
- Start date
Help Support Arborist Forum:
Trx250r180
Saw polisher
https://store.snapon.com/TORX-174-BIT-SOCKETS-C796466.aspx
A couple but do not see a t-27 ,just 30,40,etc
https://store.snapon.com/TORX-174-T-Handle-Wrench-T-Shape-TORX-reg-Green-Handle-T27-6--P884997.aspx
This is my favorite for tearing stihls down ,the handle is weighted so it spins fast ,i have the plastic handle kit also for torx and allens ,very handy
My lumber store has 6 inch bits that fit a 1/4 quick release inpact gun like a milwaukee/makita etc also ,they have hardened tips ,i can try to get an image of those .
A couple but do not see a t-27 ,just 30,40,etc
https://store.snapon.com/TORX-174-T-Handle-Wrench-T-Shape-TORX-reg-Green-Handle-T27-6--P884997.aspx
This is my favorite for tearing stihls down ,the handle is weighted so it spins fast ,i have the plastic handle kit also for torx and allens ,very handy
My lumber store has 6 inch bits that fit a 1/4 quick release inpact gun like a milwaukee/makita etc also ,they have hardened tips ,i can try to get an image of those .
fearofpavement
Trying them all
Big_Wood
westcoast dweller
Big_Wood
westcoast dweller
of course, that cull guido has me on ignore so one of you gents will have to notify him of my post lol
I buy my T-27's from Stihl, otherwise it's from Wiha... either 3.5" long or 6" long... http://www.wihatools.com/700seri/745se152.htm or http://www.wihatools.com/700seri/745ser90.htm
If you are looking for bits that would go directly on a 1/4" or 3/8" drive, they have them too in 6" in 1/4 drive only. http://www.wihatools.com/700seri/771Sockets.htm and
If you are looking for bits that would go directly on a 1/4" or 3/8" drive, they have them too in 6" in 1/4 drive only. http://www.wihatools.com/700seri/771Sockets.htm and
- Joined
- Jan 29, 2001
- Messages
- 34,025
- Reaction score
- 36,649
Done.
We used to have a great hardware store around here that stocked all of this stuff. Of course, it was torn down due to real estate pressures . . .
Philbert
Chainsaw Jim
CJ Saws, LLC
[QUOTE="westcoaster90, post: 5641267, member:
http://performanceoutdoorequipment.com/collections/tools/products/irwin-t27-torx-power-bit-t27x6[/QUOTE]
I use the Irwin. It doesn't flex very much if at all and the teeth show no signs of wear after long term use.
http://performanceoutdoorequipment.com/collections/tools/products/irwin-t27-torx-power-bit-t27x6[/QUOTE]
I use the Irwin. It doesn't flex very much if at all and the teeth show no signs of wear after long term use.
Note that if the long bit is hexagonal along the entire shank and not turned down, it will not fit inside a cylinder head and turn the mounting bolts. The shank should be no more than 6.5 mm or .254" dia.
I have bought from Cripe Dist.
http://www.ebay.com/itm/Irwin-93371...414513?hash=item4d2718bd31:g:0koAAOSwGWNUWn7U
http://www.ebay.com/itm/Irwin-93371...414513?hash=item4d2718bd31:g:0koAAOSwGWNUWn7U
Excellent, Ray. That's turned down perfectly, but I've not found a set of these in various sizes sold anywhere.
Gary, can I hijack your thread now, lol? Who sells M4, M5, and M6 6" long power drivers like those linked above?
Warped5
WingNut
+1! Good pricing and FAST shipping!!
super3
Addicted to ArboristSite
http://www.ebay.com/itm/7pc-Long-Re...:g:8LUAAOSw9mFWI8sP&item=281832005456&vxp=mtr
You need to polish the shaft a bit on the 4mm for the cyl bolts.
Thanks Mike.
This is what I use. I love them for working on stihls.
http://www.ebay.com/itm/TEKTON-7-pc...825190?hash=item5d59385f66:g:zQMAAOSwgQ9V27N6
They are lifetime warranty also.
http://www.ebay.com/itm/TEKTON-7-pc...825190?hash=item5d59385f66:g:zQMAAOSwgQ9V27N6
They are lifetime warranty also.
