Baraboo Wisconsin/ Badger Steam show old saw display/demonstration

[Nogoingback]

 

[Nogoingback]

 

[Nogoingback]

There was a hot saw class too but I took videos of those instead and I'll get them posted soon.
I also have a lot mores pictures stored on Photobucket and this is the link. http://photobucket.com/BarabooWI8-18-2012 There is a slideshow option to view the pics and the speed can be changed too.

Video of Hot Saw race is up.
<iframe width="853" height="480" src="https://www.youtube.com/embed/NauDC5GdCc4?rel=0" frameborder="0" allowfullscreen></iframe>

 

[Bill G]

Those are some of the greatest in action pics I have seen GREAT JOB

 

[heimannm]

Great photo's Chris, thanks for all!

Mark

 

[wendell]

Thanks for the photos!!

 

[McC]

Beautiful photos again Chris, here is a video of Kevin from Saskatchewan with Mark on the helper.
Stihl KS-43 2-man chainsaw - YouTube

 

[McC]

Results/times
Antique geardrive: 1 cut 16" Poplar
1 Bill G Homelite 3100 4.0
2 Bill G Homelite 3100 4.4
3 Bill G Homelite 770GS 5.4
3 James Homelite Super 1130 5.4
4 Mark H Mac 77 5.8
5 Bill G Stihl 090G 5.9
6 Mark H Mac 55 6.5
7 Mark H Mac BP1 6.5
8 Bruce Homelite Superwiz 55 10.8
9 Roger Poulan F7 15.3
10 James Homelite 8-29 16.1
11 Roger Jobu Jr Super 19.6
12 Tyler Mac 3-25 26.5 (his Great Grandfather's saw)
13 Bill G Stihl BLK 34.5

2-man Antique 1 cut 24" Silver maple
1 James and Tyler Disston 12hp 32.5
2 James and Zach Disston 9hp 39.9
3 Kevin and Steve Stihl KS-43 43.0
4 Roger Mac 940 45.1
5 Jerry and Scott Mac 7-55 46.1
6 Steve and Mark Mac 5-49 1:07.22
7 James and Zach Mall 10 1:20

Vintage Direct drive 5cu. and under 2 cuts, 10X10 silver maple
1 Scott Mac 250 10.3
2 Bruce Mac Pro 10-10 auto 19.3
3 Roger Husky F70 20.6
4 Roger Husky L65 21.4
5 Bruce Homelite 450 23.1
6 Mark Mac SP81 24.5
7 Roger Jred 801 26.0
8 James Homelite 450 26.5
9 Bruce Pioneer Farm Saw II 32.6
10 Bruce Homelite 360 32.7

Vintage Direct drive 5cu and up 2 cuts, 10X10 silver maple
1 Steve Z4lunch 7.49
2 James Homelite Super 650 8.14
3 Mark SP125 8.67
4 Steve (Wendel) Poulan 6000 9.34
5 Bill G Mac 125 9.35
6 Les Mac SP125 9.6
7 Bruce Mac 300 10.4
8 Roger SP125 12.17
9 Roger Mac 740 13.93
10 Bruce Homlite C91 14.25
11 Roger Jred 90 15.02
12 Bill G Castor 120 15.28
13 Bill G Stihl 090 15.42
14 Bill G Echo 100 19.94
15 Roger Mac 550 25.18
16 Zach Mac 1-71 25.52

Vintage Hotsaw 3 cuts 10X10 Silver Maple
1 Steve Z4lunch Montgomery Wards WD with kart parts and pipe 5.78
2 Scott Mac 250 with MC92 and pipe 6.88
3 Les MC101 with pipe 7.27

Scott

 

[Bill G]

Scott,

Thanks for posting the results. I thought James ran his Homelite 1130 but I do not see a time for it. Did he not run it?

Bill

 

[McC]

Scott,

Thanks for posting the results. I thought James ran his Homelite 1130 but I do not see a time for it. Did he not run it?

Bill

I missed it, just edited the list. He tied you for 3rd place.
Scott

 

[z4lunch]

Baraboo

I want to thank everyone that posted these great pics, and thank Scott again for putting on this show. was a great time!!

Steve

 

[Nogoingback]

Thanks for all the compliments guys.

Anybody else see the drag saws out there this year? I took a short video of one of them set up and making a cut.
[video=youtube;hqp4NFAndhg]http://www.youtube.com/watch?v=hqp4NFAndhg[/video]

 

[McC]

I didn't see that drag saw, but did see another one in action.
Scott

 

[igpoe]

Very nice pictures and videos guys, thanks. I'd like to make that show someday.
Igpoe

 

[McC]

Here's Mark (heimannm) running his SP81
Scott
McCulloch SP81 - YouTube

 

[McC]

Bruce running Homelite C91
Scott
<iframe width="420" height="315" src="http://www.youtube.com/embed/asFblPQRb2Y" frameborder="0" allowfullscreen></iframe>

 

[Bill G]

I want to thank everyone that posted these great pics, and thank Scott again for putting on this show. was a great time!!

Steve

Steve,

I want to thank you for all the years you have ran the stop watches. It would be impossible without that. Many folks do not realize how much work goes into the show. Scott does a he'' of a job putting it together but without you and Les we would be lost.

r

Bill

 

[dinosaur50]

me 2 I'd like to make that show someday

Very nice pictures and videos guys, thanks. I'd like to make that show someday.
Igpoe

me 2 I'd like to make that show someday.

 

[Madsaw]

It was greet that you guys made your way over to the flea market area to check out what I had and say Hi. The wife keeps me on a short leash up there during the show. Must be afraid I will spend the earnings.
I am going to be heading up a local antique show at Argyle WI this year on Sept 8,9. Just wondering if any folks from around here would like to come and do some demos of the old saws. I know some already have plans for that weekend. This will be a first time for this show. We previously was at the show in Darlington. I will also start a thread on it to.
Thank
Bob

 

[McC]

This is my great find at the swap meet, a Homelite 770GS, and it runs, the transmission works too. Needs some cleaning.
Scott