can you post your 044-460 pics here

[Evan]

Evanrude

i have the filter off the 084 is the same as the 044, i think im just gona run it cover less on the 044 forawhile till i run into cheap 044 cover

i did notice baileys big air kits works on everything 044-460

 

[MS460WOODCHUCK]

It had a bunch of fun this day-

<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=cuttingwood015.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/cuttingwood015.jpg" border="0" alt="Photobucket"></a>

<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=cuttingwood003.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/cuttingwood003.jpg" border="0" alt="Photobucket"></a>

<a href="http://s493.photobucket.com/albums/rr293/ms460woodchuck/?action=view&current=cuttingwood014.jpg" target="_blank"><img src="http://i493.photobucket.com/albums/rr293/ms460woodchuck/cuttingwood014.jpg" border="0" alt="Photobucket"></a>

And so did I! It's up to 13 tanks of mix and really starting to come alive!

 

[Evan]

mine startn to look like a complete saw.

my ebay muffler showed up only a few days after i won the bid. and im stihl watn for my 359 muffler that shipped from texas last tuesday. 044 muff came from main much farther away than texas,


i just had to put it together to see what it looked like. i orderd a husky 394 muffler defelctor thats comeing with the 359 muffler. i think its going on the 044 on the other side.

this is kinda a teaser since theres no piston in there.

i realy like this muffler, it was dirt cheap showed up quick and is easily moddable thick to if i decide to do some welding on it.

 

[cbrduckdog]

Here is my 440 with 28" bar on a stump from a week ago. Love stump shotsView attachment 95499

 

[Erick]

OK Evan here ya go, no pressure..... think of it more as motivation to get that bad boy done.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/txs8vI8IBVQ&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/txs8vI8IBVQ&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

 

[Evan]

that thing ported, is it a 044 or 46. looks like shes cutn realy well

i havent decided on bar lenght yet. might just go with a 25" since i have bigger saw now.

or i may go with 28" since i ported 359 runs very good with the 24"

i dunno maybe ill throw the 18" bar thats on the 026 on it after i get running and then decide it might be fire breather and a 28 would match it real well.

ahh i see the vid says 044, i watched it again

 

[2000ssm6]

that thing ported, is it a 044 or 46. looks like shes cutn realy well

I'm pretty sure that 044 is ported. Once you run a ported 044 or 046 you will not want to pick up another saw.

 

[Evan]

im gona have 60cc vs 70cc ported shoot out soon, both wearing 24/25" bars and cutn bar size wood.

i realy feel ive ported this thing better than i did the 359. it should cut much faster. though i now know theres areas that need lookin at inside the 359. it could use more work and still may be gains to be had.

 

[Erick]

that thing ported, is it a 044 or 46. looks like shes cutn realy well

i havent decided on bar lenght yet. might just go with a 25" since i have bigger saw now.

or i may go with 28" since i ported 359 runs very good with the 24"

i dunno maybe ill throw the 18" bar thats on the 026 on it after i get running and then decide it might be fire breather and a 28 would match it real well.

ahh i see the vid says 044, i watched it again

It's ported

Here's a stock 660 for compairison... same day, same wood, new off the reel RSC chains..... you can actually see the same knot in the wood after the 660 cut.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/1PaLe9YIel4&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/1PaLe9YIel4&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

I actually took these vids for a 660 I was building and threw the 044 into the mix for fun..... I'd say it held it's own.

Here's a ported 660 done by a local shop.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/DYTdMr7Pk7Q&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/DYTdMr7Pk7Q&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

Somebody get out the stop watch.


BTW Brad, this is the same 660 you guys ran at the GTG at Jeepers.

This is what it runs like now.

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/wpKEjlobUjk&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/wpKEjlobUjk&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

Still not quite what I think it should be but I'm out of plating to get it there.

 

[Evan]

this ones for K5crawler

my other hobby

 

[Evan]

those 660s sound very good:greenchainsaw:

 

[Erick]

I'm pretty sure that 044 is ported. Once you run a ported 044 or 046 you will not want to pick up another saw.

So says the man begging for a 441.

 

[2000ssm6]

So says the man begging for a 441.

I gotta see proof they can run like a ported 440/460 first.:hmm3grin2orange:

 

[Evan]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/drI8sUI0MPc&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/drI8sUI0MPc&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/55pCMN3QVHg&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/55pCMN3QVHg&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

 

[Evan]

has 150lbs of compression, fuel line was melted in two at the feul filter, this one may running today

and shes now runing and pretty darn good. im thinking about putn my ported cylinder on this saw ounce i get all the bugs worked out, its smokn from the chain case. i pulled the muffler cover and the piston doesnt have mark on it.

this would be mean little limber, saw feels very nimble and light with the 18" bar on it

 

[MNfarmer]

Bought new in 07, this is the last one the dealer had. They found another one for my cousin who had to have one after running mine!

 

[Trigger-Time]

Bought new in 07, this is the last one the dealer had. They found another one for my cousin who had to have one after running mine!

How about getting a factory DP muffler cover for that nice saw

440/460, 044/046 Dual port cover # 1128 140 0801



TT

 

[dieselram]

Here is my MS460. It was a $250 dollar Craigslist purchase... I put a new clutch cover on it, a HO oiler and a Madsens 3/4 wrap handle bar.... Soon to be freshened up with a DP cover and maybe some porting...

 

[mdavlee]

Good looking saw! I finally figured out how to post pictures with the droid.

 

[Trigger-Time]

Good looking saw! I finally figured out how to post pictures with the droid.

Sorry to say but all I see is a red X No picture.




TT