T thenavakasalian New Member Joined Mar 23, 2012 Messages 1 Reaction score 0 Location fiji islands Mar 23, 2012 #1 when turning H and L screws, 3/4 and 1/4 turns are clockwise or counter? thanks guys.
RandyMac Stiff Member Joined Sep 16, 2008 Messages 14,472 Reaction score 9,001 Location 51st State of Jefferson Mar 23, 2012 #2 Turn both needles, carefully, clockwise until they bottom out, do not force them tight, just light contact. If tightened they might damage the seat and needle. Then turn out, counter clockwise, one turn is considered a good starting point
Turn both needles, carefully, clockwise until they bottom out, do not force them tight, just light contact. If tightened they might damage the seat and needle. Then turn out, counter clockwise, one turn is considered a good starting point