chain roller?

[SawTroll]

does the roller stop the the chain if it comes off the bar,like the catcher does?

It is a chain catcher, not a "roller".

 

[BluntForgedEdge]

Please excuse my ignorance here for I'm still in the green and learning. Is the stock chain catcher assembly not needed if there is a roller chain catcher assembly in place? Just want to make sure that I understand this correctly.

correct

If in answer to that question; thank you!

 

[demc570]

It is a chain catcher, not a "roller".

ok ,now i getting confused,so iam asking,in my confusion,is the stock chain catcher that came on the saw ms660,if i put the roller in place of the stock catcher,will it still stop the chain,as good good as the stock catcher???
thanks:smile2:

 

[young]

they both serve the same purpose which is to stop a thrown chain.

you wont be able to install the roller catcher with the stock aluminum catcher in place. its gets in the way on the 066/660. its one or the other.

 

[demc570]

got it,thanks again:msp_thumbup:

 

[cutforfun]

:camera: lets see some saw #### with the new dawgs and roller

 

[2dogs]

It is a chain catcher, not a "roller".

True but I call it a roller catcher. I don't know what the official Stihl name for the device is. On my 660 and 460 I have an aftermarket full wrap handle so I don't run a separate catcher.

 

[BluntForgedEdge]

True but I call it a roller catcher. I don't know what the official Stihl name for the device is. On my 660 and 460 I have an aftermarket full wrap handle so I don't run a separate catcher.

Looking at the IPL that I have for the MS 362, it simply states "chain catcher." The synthetic "roller" is just called a "sleeve." The complete assembly is just that, chain catcher. Thought that was interesting how it's listed that way.

 

[redoakneck]

they both serve the same purpose which is to stop a thrown chain.

you wont be able to install the roller catcher with the stock aluminum catcher in place. its gets in the way on the 066/660. its one or the other.

Are you sure? I think I have both on mine now, will change it out ASAP.

 

[demc570]

cool,i think i got it...i got the protective cover piece,and the roller,going to install it after while...

 

[1dragon]

Just wanted to say thank you again to everybody. I finally recieved all the parts and converted over to the large clutch cover, 8 pin rim,roller catcher and the protective nylon piece for the case. Wouldn't have known about the case protection piece without you guys. Painted the rib black on the new cover as well. All that's left is the half wrap handle now. Oh and to see if it will pull the new Stihl RS full comp 28" with the 8 pin on it :biggrin:.

 

[1dragon]

Okay in keeping with the rules here are some pics. New clutch cover with roller and nylon piece, new top name plate and sorta a pic of the dual outlet MM I did to it.View attachment 284776View attachment 284777View attachment 284778View attachment 284780

 

[KenJax Tree]

Just got mine last week and so far have not had a chance to get it in wood yet. Hopefully very soon!! Thank you!

Dang...i got my 562xp last week and have about 25 tanks through it.

 

[1dragon]

Dang...i got my 562xp last week and have about 25 tanks through it.

Yea I know, it's killing me. I had all the wood done for winter after I got it. I do have some trees I have to go cut, but I have to get the time to go do it. Busy with tractor work now and one tree I have to build a road over a culvert to haul it out as it's on an island. Hopefully soon I will be logging some hours on her. Anxious to see how it does with the 8 pin and RS chain. Dang that chain is SHARP!:hmm3grin2orange:

 

[KenJax Tree]

Yea I know, it's killing me. I had all the wood done for winter after I got it. I do have some trees I have to go cut, but I have to get the time to go do it. Busy with tractor work now and one tree I have to build a road over a culvert to haul it out as it's on an island. Hopefully soon I will be logging some hours on her. Anxious to see how it does with the 8 pin and RS chain. Dang that chain is SHARP!:hmm3grin2orange:

I'm just messin' with you. My saw pay my bills so they get run more.

P.S. right out of the box run the file acrossed that chain i even knock the rakers down a few strokes (2-3) but be very careful doing that.

 

[1dragon]

I'm just messin' with you. My saw pay my bills so they get run more.

P.S. right out of the box run the file acrossed that chain i even knock the rakers down a cew strokes but be very careful doing that.

LOL, yea I don't pay the bills with mine. Just an idiot that enjoys saws and cuttin wood.:wink2: It's funny you talk about the rakers as I like cutting them down. I almost over did it on the 390 chain.:hmm3grin2orange:

 

[KenJax Tree]

LOL, yea I don't pay the bills with mine. Just an idiot that enjoys saws and cuttin wood.:wink2: It's funny you talk about the rakers as I like cutting them down. I almost over did it on the 390 chain.:hmm3grin2orange:

Yeah you don't wanna over do it, i saw a guy get a 372 ripped right out of his hands taking too much.